Puch 250 SG - Fitting the toolbox components of the electronic ignition
In order to fit the new high Burgess exhaust, I had to remove the SG's toolbox and shift the regulator and coil unit of the electrinic ignition from the outer mounting bracket to inside the toolbox.
Видео Puch 250 SG - Fitting the toolbox components of the electronic ignition канала Puch NZ
Видео Puch 250 SG - Fitting the toolbox components of the electronic ignition канала Puch NZ
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Unboxing - RBO #4
Puch 250 SG - First start after crankshaft rebuild
Unboxing RBO #4 - and what's happening next
Puch SR - Fitting the hand shifter cable - Seilzug für Handschaltung einbauen
Puch SRA 150 ready for sale
Puch RLA/SRA - Removing the armature - Anker abziehen
Welcome to Puch in NZ
Puch TF/SG Oil Pump Measurements (Part 2) - Messungen an der Puch TF-SG Ölpumpe (Teil 2)
Puch SR - Fitting the speedo cable rear sleeve - Gummitülle über Tachowelle ziehen
Puch SR/RL - Cheap 12V light and charging conversion - Kostengünstige 12V-Licht- und Ladeumrüstung
Puch SR - Mudguard, headlamp mask and shock absorbers - Kotflügel, Lampenmaske und Stoßdämpfer
Puch TF/SG Oil Pump Measurements (Part 1) - Messungen an der Puch TF-SG Ölpumpe (Teil 1)
Puch SR - Running cables - Seilzüge verlegen
Repairing Hella main switches (Puch SG/S, SR/A) - Hella-Hauptschalter reparieren
Puch SR - Front Shock Assembly - Stoßdämpfer zusammenbauen
Puch SR - Mounting the rear swing arm - Hinterradfederung einbauen
Puch SR - Removing rusted and fitting new tyre - Festgerosteten Reifen entfernen und neuen aufziehen
What's happening - and a quick unboxing
What's happening in the garage - just a quick catchup.
Will a Dellorto carb fit under the Puch DS60R covers? Dellorto-Vergaser unter DS60R-Abdeckungen?