Puch 250 SG - First start after crankshaft rebuild
I bought this 1963 Puch 250 SG in August 2020, together with a 1954 SGS in parts and another half-complete SG. The plan was to sell the SG quickly and use the proceeds to build up the SGS. Unfortunately, the big end bearing of the SG crankshaft needed a rebuild, and it has taken until now to get it back together. This video shows the first start after rebuilding the engine with new pistons, bearings and seals.
Видео Puch 250 SG - First start after crankshaft rebuild канала Puch NZ
Видео Puch 250 SG - First start after crankshaft rebuild канала Puch NZ
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Unboxing - RBO #4Unboxing RBO #4 - and what's happening nextPuch SR - Fitting the hand shifter cable - Seilzug für Handschaltung einbauenPuch SRA 150 ready for salePuch RLA/SRA - Removing the armature - Anker abziehenWelcome to Puch in NZPuch TF/SG Oil Pump Measurements (Part 2) - Messungen an der Puch TF-SG Ölpumpe (Teil 2)Puch 250 SG - Fitting the toolbox components of the electronic ignitionPuch SR - Fitting the speedo cable rear sleeve - Gummitülle über Tachowelle ziehenPuch SR/RL - Cheap 12V light and charging conversion - Kostengünstige 12V-Licht- und LadeumrüstungPuch SR - Mudguard, headlamp mask and shock absorbers - Kotflügel, Lampenmaske und StoßdämpferPuch TF/SG Oil Pump Measurements (Part 1) - Messungen an der Puch TF-SG Ölpumpe (Teil 1)Puch SR - Running cables - Seilzüge verlegenRepairing Hella main switches (Puch SG/S, SR/A) - Hella-Hauptschalter reparierenPuch SR - Front Shock Assembly - Stoßdämpfer zusammenbauenPuch SR - Mounting the rear swing arm - Hinterradfederung einbauenPuch SR - Removing rusted and fitting new tyre - Festgerosteten Reifen entfernen und neuen aufziehenWhat's happening - and a quick unboxingWhat's happening in the garage - just a quick catchup.Will a Dellorto carb fit under the Puch DS60R covers? Dellorto-Vergaser unter DS60R-Abdeckungen?