Puch RLA/SRA - Removing the armature - Anker abziehen
This video describes how to remove an armature that has been fitted to the engine for a long time. I think this is the first video I recorded pretty much exactly a year ago.
IMPORTANT: The pin MUST be hardened steel! Soft steel will spread and you will never get the pin out again.
If the armature doesn't want to come off despite tensioning the bolt, hitting the bolt head with a hammer may help.
Видео Puch RLA/SRA - Removing the armature - Anker abziehen канала Puch NZ
IMPORTANT: The pin MUST be hardened steel! Soft steel will spread and you will never get the pin out again.
If the armature doesn't want to come off despite tensioning the bolt, hitting the bolt head with a hammer may help.
Видео Puch RLA/SRA - Removing the armature - Anker abziehen канала Puch NZ
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Unboxing - RBO #4Puch 250 SG - First start after crankshaft rebuildUnboxing RBO #4 - and what's happening nextPuch SR - Fitting the hand shifter cable - Seilzug für Handschaltung einbauenPuch SRA 150 ready for saleWelcome to Puch in NZPuch TF/SG Oil Pump Measurements (Part 2) - Messungen an der Puch TF-SG Ölpumpe (Teil 2)Puch 250 SG - Fitting the toolbox components of the electronic ignitionPuch SR - Fitting the speedo cable rear sleeve - Gummitülle über Tachowelle ziehenPuch SR/RL - Cheap 12V light and charging conversion - Kostengünstige 12V-Licht- und LadeumrüstungPuch SR - Mudguard, headlamp mask and shock absorbers - Kotflügel, Lampenmaske und StoßdämpferPuch TF/SG Oil Pump Measurements (Part 1) - Messungen an der Puch TF-SG Ölpumpe (Teil 1)Puch SR - Running cables - Seilzüge verlegenRepairing Hella main switches (Puch SG/S, SR/A) - Hella-Hauptschalter reparierenPuch SR - Front Shock Assembly - Stoßdämpfer zusammenbauenPuch SR - Mounting the rear swing arm - Hinterradfederung einbauenPuch SR - Removing rusted and fitting new tyre - Festgerosteten Reifen entfernen und neuen aufziehenWhat's happening - and a quick unboxingWhat's happening in the garage - just a quick catchup.Will a Dellorto carb fit under the Puch DS60R covers? Dellorto-Vergaser unter DS60R-Abdeckungen?