DIY Super Long Carbon Fiber Selfie Pole with 3D Printed GoPro Hardware

Just a really long DIY camera pole to get unique shots.
Download the printable files here: https://www.rcwithadam.com/selfie-pole-3d-printed-parts-14mm-dia

Get carbon fiber tubes here: https://windcatcherrc.com/product/3k-carbon-fiber-tube-14mm-x-12mm-x-1000mm/

M5 hardware I used (in addition to the gopro thumb screws): https://amzn.to/3fCnUSx
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/

Want to support RCwithAdam? ↴
KO-FI: https://ko-fi.com/rcwithadam
Thanks!

-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
**DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!**
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam

Видео DIY Super Long Carbon Fiber Selfie Pole with 3D Printed GoPro Hardware канала RCwithAdam