DumPro9 Giveaway Winner Announcement!

IMPORTANT: The winner MUST email Adam (Adam@RCwithAdam.com) WITHIN ONE (1) WEEK of the post date of this video (so, by April 6, 11:59pm Eastern Time) to claim this one-of-a-kind DumPro9!

Winner: Jean-Christophe Boies
Runner-up (in case the winner does not claim prize): TK.

Here is the original Golden DumPro9 giveaway video: https://youtu.be/aj2YydALCSw
Thank you all for participating! Keep an eye out for more giveaways!
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/

Want to support RCwithAdam? ↴
KO-FI: https://ko-fi.com/rcwithadam
OR
PATREON: https://www.patreon.com/RCwithAdam
Thanks!

-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
**DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!**
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam

Видео DumPro9 Giveaway Winner Announcement! канала RCwithAdam