Electrolux Washing Machine Diagnostics Menu Time Manager - EWF12832 - EWF14822 - EWF14922
How to enter the diagnostics mode on Electrolux Time Manager EWF12832, EWF14822 and EWF14922 washing machine.
To enter the diagnostics mode on your Electrolux washing machine turn on the machine and make sure the first cycle light is selected.
Press and hold the start button and the button above the start button for a few seconds until lights start to randomly flash.
Once in the diagnostics cycle, use the dial to test each individual component.
Position 1: Lights test.
Position 2: Door should lock and Wash water valve will activate and fill water into Main-Wash compartment.
Position 3: Pre-Wash water valve will fill the pre-wash compartment.
Position 4: Both wash and Pre-Wash solenoids will activate and fill the conditioner compartment.
Position 5: Not applicable on this model.
Position 6: Not applicable on this model.
Position 7: Water will fill above the heater, circulation pump will activate and the heater will turn on. Water temperature will be displayed on the screen. If you see the water temperature going up, this means your heater and thermostat are working.
Position 8: Water will fill and drum will rotate 55 RPM clockwise and 250 RPM anticlockwise. The number on the screen needs to be multiplied by 10 to get the actual drum speed. This tests the tub for leaks.
Position 9: Tests the spin cycle. Drum will rotate at maximum speed. Drum speed will be displayed on the screen. The number on the screen needs to be multiplied by 10 to get actual drum speed.
Position 10: Not applicable on this model.
Position 11: Last stored error code in memory. To clear the code simultaneously press the start and button above the start for few seconds. Visit our website to find out the meaning of the fault code: https://appliancefault.com.au/faults/washing-machine-faults/electrolux-washing-machine-fault-codes/
To exit the diagnostics mode, turn off the machine, turn it back on and then turn it off again.
Electrolux washing machine fault codes: https://appliancefault.com.au/faults/washing-machine-faults/electrolux-washing-machine-fault-codes/
Видео Electrolux Washing Machine Diagnostics Menu Time Manager - EWF12832 - EWF14822 - EWF14922 канала Appliance Fault
To enter the diagnostics mode on your Electrolux washing machine turn on the machine and make sure the first cycle light is selected.
Press and hold the start button and the button above the start button for a few seconds until lights start to randomly flash.
Once in the diagnostics cycle, use the dial to test each individual component.
Position 1: Lights test.
Position 2: Door should lock and Wash water valve will activate and fill water into Main-Wash compartment.
Position 3: Pre-Wash water valve will fill the pre-wash compartment.
Position 4: Both wash and Pre-Wash solenoids will activate and fill the conditioner compartment.
Position 5: Not applicable on this model.
Position 6: Not applicable on this model.
Position 7: Water will fill above the heater, circulation pump will activate and the heater will turn on. Water temperature will be displayed on the screen. If you see the water temperature going up, this means your heater and thermostat are working.
Position 8: Water will fill and drum will rotate 55 RPM clockwise and 250 RPM anticlockwise. The number on the screen needs to be multiplied by 10 to get the actual drum speed. This tests the tub for leaks.
Position 9: Tests the spin cycle. Drum will rotate at maximum speed. Drum speed will be displayed on the screen. The number on the screen needs to be multiplied by 10 to get actual drum speed.
Position 10: Not applicable on this model.
Position 11: Last stored error code in memory. To clear the code simultaneously press the start and button above the start for few seconds. Visit our website to find out the meaning of the fault code: https://appliancefault.com.au/faults/washing-machine-faults/electrolux-washing-machine-fault-codes/
To exit the diagnostics mode, turn off the machine, turn it back on and then turn it off again.
Electrolux washing machine fault codes: https://appliancefault.com.au/faults/washing-machine-faults/electrolux-washing-machine-fault-codes/
Видео Electrolux Washing Machine Diagnostics Menu Time Manager - EWF12832 - EWF14822 - EWF14922 канала Appliance Fault
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Bosch Dishwasher Sump ReplacementSimpson Washing Machine Drain Pump Replacement - E20 errorSimpson Washing Machine Water Inlet Valves Replacement - E10 ErrorBosch washing machine -0- on screen door not opening. Child lock Key lock deactivation.Simpson Washing Machine Diagnostics Mode Top LoaderBosch Washing Machine Water Inlet Valve Replacement Maxx ClassixxBosch Washing Machine Door Lock Replacement Maxx ClassixxBosch Washing Machine Door Seal Replacement Maxx ClassixxLG Washing Machine Door Seal Replacement - WD12020DElectrolux Washing Machine Diagnostics Menu - EWF14742 time managerElectrolux dryer diagnostics mode - How to see last error codeBosch washing machine drain pump filter stuck - Avantixx Vario Perfect Eco Silence DriveBosch washing machine door seal replacement - Avantixx VarioPerfect EcoSilence DriveSamsung WW85K6410QX - washing machine door seal replacementHow to see last fault code on ASKO dishwasher D5456 DW16.1Samsung washing machine drain pump cleaning - Washing machine not draining 5E errorSimpson Washing Machine Diagnostics Menu - EZI sensor InverterFisher and Paykel Aquasmart Washing Machine Diagnostics Menu and Fault Code ReadoutHow To Replace Drain Hose on Bosch dishwasherHow to replace drain pump in Bosch dishwasher