Part 20: INDUCTION - Industrial plain buttonhole machine
Instructions on how to operate the plain buttonhole machine, including general operation, winding a bobbin and threading the machine.
Remember that when winding the bobbin that each cycle of the machine is like sewing one buttonhole, so you should only need to go through however many cycles you have buttons. 6 buttonholes = 6 winding cycles of the machine. Plus maybe an extra one for luck. You don't have to wind the whole bobbin.
Видео Part 20: INDUCTION - Industrial plain buttonhole machine канала QUTFashionStudio
Remember that when winding the bobbin that each cycle of the machine is like sewing one buttonhole, so you should only need to go through however many cycles you have buttons. 6 buttonholes = 6 winding cycles of the machine. Plus maybe an extra one for luck. You don't have to wind the whole bobbin.
Видео Part 20: INDUCTION - Industrial plain buttonhole machine канала QUTFashionStudio
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Pattern communication / labelling / notches / grains etc...Binding - how to cutPart 9: 1st year blouse exercise - collarMaking a pattern for a centre back vent, facing and lining of a jacketFabric basics and laying upSewing a cuffed sleeve prep using the magic finger technique - Part 12Bodice Panel Lines - Turning darts into armhole panel lines.Variations on panel shaping for a gored skirtSewing an All-in-one Facing cut in lining fabricPencil skirt 3 - Sewing darts + using a thread guide (2nd dart in video)Basic patch pocket and flapMaking a pattern for an unlined centre back jacket ventBasic patch pocket and flap with outer box pleatAdding gathers/fullness into a shoulder yoke. Split and spread method.Sewing a dartless lined jacket 8 - One-piece sleeve/lining/hemBluff pocket. A patch pocket with rounded corners and no visible outside stitching.Copy a pattern off a readymade shirt - Collar StandBlock fusing to save time and energyDart manipulation - Moving darts between the side and waist seams.Patch pocket (3D) with darted cornersPatternmaking skirts - A-line skirt - Part 1