Binding - how to cut
Instructions on how to cut your own flat woven or knit binding for a 30mm binding attachment on a straight-sewer machine (bias binding) and also for a cover-stitch binding machine.
Видео Binding - how to cut канала QUTFashionStudio
Видео Binding - how to cut канала QUTFashionStudio
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Pattern communication / labelling / notches / grains etc...Making a pattern for a centre back vent, facing and lining of a jacketSewing a cuffed sleeve prep using the magic finger technique - Part 12Bodice Panel Lines - Turning darts into armhole panel lines.Variations on panel shaping for a gored skirtSewing an All-in-one Facing cut in lining fabricPencil skirt 3 - Sewing darts + using a thread guide (2nd dart in video)Basic patch pocket and flapPart 14: 1st year blouse exercise - LHS sleeve with cuffMaking a pattern for an unlined centre back jacket ventBasic patch pocket and flap with outer box pleatAdding gathers/fullness into a shoulder yoke. Split and spread method.Sewing a dartless lined jacket 8 - One-piece sleeve/lining/hemBluff pocket. A patch pocket with rounded corners and no visible outside stitching.Block fusing to save time and energyDart manipulation - Moving darts between the side and waist seams.Patch pocket (3D) with darted cornersThreading the machine - remember to switch off machine firstKangaroo pocketAn introduction to basic skirt styles - Part 2