Basic patch pocket and flap with outer box pleat
This patch pocket and flap has curved corners. The pocket has a centre box pleat which is stitched in place internally. A buttonhole/s and button/s can be added during construction.
Видео Basic patch pocket and flap with outer box pleat канала QUTFashionStudio
Видео Basic patch pocket and flap with outer box pleat канала QUTFashionStudio
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Pattern communication / labelling / notches / grains etc...
Binding - how to cut
Making a pattern for a centre back vent, facing and lining of a jacket
Fabric basics and laying up
Sewing a cuffed sleeve prep using the magic finger technique - Part 12
Bodice Panel Lines - Turning darts into armhole panel lines.
Variations on panel shaping for a gored skirt
Sewing an All-in-one Facing cut in lining fabric
Basic patch pocket and flap
Making a pattern for an unlined centre back jacket vent
Adding gathers/fullness into a shoulder yoke. Split and spread method.
Bluff pocket. A patch pocket with rounded corners and no visible outside stitching.
Copy a pattern off a readymade shirt - Collar Stand
Block fusing to save time and energy
Dart manipulation - Moving darts between the side and waist seams.
Patch pocket (3D) with darted corners
Threading the machine - remember to switch off machine first
Kangaroo pocket
Sewing a blouse - Puff sleeve into the armhole - Part 16
An introduction to basic skirt styles - Part 2