Battery Charger / Power Supply
This is a nice inexpensive down converter that can be used for a power supply or a battery charger.
Check this idea out: You can charge your project battery with this module then simply turn it around and run your project using the converter as the power supply. In this way you can set it to any voltage for the project and add the amount of current limiting you need to be safe. You probably don't need a fuse on the battery anymore.
ICStations information:
http://www.icstation.com/current-voltage-display-step-down-module-panel-p-2455.html
5V-30V 5A Red Current Voltage Display Step Down Module LED Panel
This discount code may apply for 10% off. (one time)
Code: Dadics
SKU: 2455
Description
Module Properties:Non-isolated step-down module
Rectification:Non-Synchronous Rectification
Input Voltage:5V-30V
Output Voltage:0.8V-29V
Output Current:Max 5A (over 3A to enhance heat dissipation)
Conversion efficiency:95% (the highest)
Switching frequency:300KHz
Output Ripple:50mV (max) 20M Bandwidth
Load Regulation:+/-0.5%
Voltage Regulation:+/-2.5%
Operating Temperature:-40℃ to +85℃
Size:51*26.3*14 (L*W*H)(mm)
Module Name:Current and voltage table
Measurement Accuracy:0.1%
Refresh rate:About 200ms time
Display:Dual 4bits 0.28" digital tube
Current Range:0A-5A
Voltage range:5V-30V
Operating Current:Less than 15mA
Display Color:Red
Storage Temperature:-10℃ to +65℃
Input impedance:50 milliohms
External dimensions:51*26.3*10mm
Rechargeable lithium-ion battery
When the lithium-ion battery voltage is relatively low, if the direct use of constant voltage charging, the voltage difference due to the larger, leading the charge current is too large, resulting in damage to the battery, so when you want to start using the constant battery current charging, when the charge to a certain extent automatically switches back when the constant voltage charging.
Module above indicated IN-(input negative), IN+(positive input), OUT-(negative output), OUT+(positive output) must be connected to the right, otherwise may cause damage to the module.
Видео Battery Charger / Power Supply канала DadHav
Check this idea out: You can charge your project battery with this module then simply turn it around and run your project using the converter as the power supply. In this way you can set it to any voltage for the project and add the amount of current limiting you need to be safe. You probably don't need a fuse on the battery anymore.
ICStations information:
http://www.icstation.com/current-voltage-display-step-down-module-panel-p-2455.html
5V-30V 5A Red Current Voltage Display Step Down Module LED Panel
This discount code may apply for 10% off. (one time)
Code: Dadics
SKU: 2455
Description
Module Properties:Non-isolated step-down module
Rectification:Non-Synchronous Rectification
Input Voltage:5V-30V
Output Voltage:0.8V-29V
Output Current:Max 5A (over 3A to enhance heat dissipation)
Conversion efficiency:95% (the highest)
Switching frequency:300KHz
Output Ripple:50mV (max) 20M Bandwidth
Load Regulation:+/-0.5%
Voltage Regulation:+/-2.5%
Operating Temperature:-40℃ to +85℃
Size:51*26.3*14 (L*W*H)(mm)
Module Name:Current and voltage table
Measurement Accuracy:0.1%
Refresh rate:About 200ms time
Display:Dual 4bits 0.28" digital tube
Current Range:0A-5A
Voltage range:5V-30V
Operating Current:Less than 15mA
Display Color:Red
Storage Temperature:-10℃ to +65℃
Input impedance:50 milliohms
External dimensions:51*26.3*10mm
Rechargeable lithium-ion battery
When the lithium-ion battery voltage is relatively low, if the direct use of constant voltage charging, the voltage difference due to the larger, leading the charge current is too large, resulting in damage to the battery, so when you want to start using the constant battery current charging, when the charge to a certain extent automatically switches back when the constant voltage charging.
Module above indicated IN-(input negative), IN+(positive input), OUT-(negative output), OUT+(positive output) must be connected to the right, otherwise may cause damage to the module.
Видео Battery Charger / Power Supply канала DadHav
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
DIY Inexpensive Variable Constant Current Constant Voltage Power Supply for under $20Lead Acid/Lithium battery charger make by XH-M603 charge controller (computer power supply charger)Review of XL4015 5A 1.25 -30V DC CC Buck converter with thermal imageDIY Laptop PowerBank (battery pack to charge your laptop on the go)Buck Converter DC/DC PSU has Voltmeter and Ammeter and a Bug!Build a Simple Power SupplyCheap Lithium Battery Charger OSKJ Buck Converter (Constant Current-Voltage) Review-TestHow to Charge Lithium Ion 18650 Battery with Just a Smart Phone ChargerATX PC - DON' T THROW THAT AWAY!!! here is a BIG ideaSwitching power supply repair. Laptop charger repair.How to make Power Supply DIY VINTAGE STYLE ( 0-24v 8A )How To Make A 12 Volt 5 Amp Battery Charger - DIY Technology Tutorial - GuidecentralWhat You Need To Know Before Buying A Boost/Buck ConverterMega Raizin car fuel saver and booster.How To Make Lithium ion Battery Charger | 1S to 6S Lithium Battery chargerThe Ultimate DIY Variable Lab Bench Power SupplyEEVblog #919 - How To Charge Li-Ion/LiPo Batteries With A Power SupplyDIY 18650 Battery Charger - How to make lithium-ion cell ChargerChinese 12V 30A Power SupplyToolkitRC P200: what's it good for? (Tiny 10A 30v bench power supply)