APM2.6 Intelligent External LED for F450 frame 2 type
Features:
This production is suitable for FPV frames like QAV180, 210, 250 and some larger frame like 450 550 Quadcopter with a long arm.
Super bright: using 0.5W high-power LED chip, with excellent penetrating, although at long-range you can still distinguish the orientation of the head via LED color
Tolerate wide voltage input (7~28V) with BEC module
up to 7 colors can be easily changed via the switch on board.
Blink option: There is a smart LED mode controller which can make led get solid on, off or flashing. moreover, the flashing speed and pattern can be changed. This feature can make your drone more visible and cooler. In this blink option, there are two type connections as below picture, one is two solid two flash. the other is all flash.
APM option: This option is only suitable for APM2.5 2.6 or 2.8 flight controller. The RGB LED can flash and get solid according to the status of APM 2.x(arm, GPS fix, low battery). There is a buzzer on driver module which can also emit sound according to the status of flight controller.
Видео APM2.6 Intelligent External LED for F450 frame 2 type канала Ryouko D.
This production is suitable for FPV frames like QAV180, 210, 250 and some larger frame like 450 550 Quadcopter with a long arm.
Super bright: using 0.5W high-power LED chip, with excellent penetrating, although at long-range you can still distinguish the orientation of the head via LED color
Tolerate wide voltage input (7~28V) with BEC module
up to 7 colors can be easily changed via the switch on board.
Blink option: There is a smart LED mode controller which can make led get solid on, off or flashing. moreover, the flashing speed and pattern can be changed. This feature can make your drone more visible and cooler. In this blink option, there are two type connections as below picture, one is two solid two flash. the other is all flash.
APM option: This option is only suitable for APM2.5 2.6 or 2.8 flight controller. The RGB LED can flash and get solid according to the status of APM 2.x(arm, GPS fix, low battery). There is a buzzer on driver module which can also emit sound according to the status of flight controller.
Видео APM2.6 Intelligent External LED for F450 frame 2 type канала Ryouko D.
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Conectar/instalar controladora Ardupilot APM 2.6-2.8 y el receptor del cheerson cx20 - Parte 5Smart RGB LED and Navigation LED for Pixhawk I2C external LEDHow to connect LED light in APM 2.8Apm 2.8 & F450 Drone flying Test #tech_SLRemote Controlled Navigation LED Light for F450 F330 F550 Quadcopter Hexacopter Frame DroneRobocat 270 FPV Racer Quad kit Assembly Part 3 Main FrameDJI F550 Hexacopter crash after flight above the cloudsПодвес FPV с вертикальным стабилизатором. Квадрокоптер F450 на APM 2.8.PIR Sensor all about in hindi.3DR Pixhawk Installation Part 1 - Physical Connectons(2/8) APM 2.5/2.6 - Powering the board, motor installation and ESC calibrationKonfiguracja APM - Przygotowanie radia do konfiguracji kontrolera - ABC-RC.PL2 Axis Brushless Gimbal Setup by AtechtechnologyUAV drone Drifter ultralight - 15.36km autonomous flight on APMF14893-FDIY 380 Quadcapter with FPV APM2.8 920KV Motor 30A ESC flysky 2.4GFS-i6 TransmitterHOW TO DESTROY A SMART CAR | TURBO SMART | [4K]Ardurover first try (omnibus f4 pro v2.1)F450 Quadcopter Installing LED LightsPixfalcon Flight controller and Waterproof Mini Bullfrog by AquacoptersFPV Part 5: 3DR APM 2.6 Setup for Power Module and MinimOSD Battery Voltage.