Making a Stitch and Glue Duet 16 Kayak

I documented the complete build of a stitch and glue kayak. This kayak is made from 4mm Okoume plywood and 6 oz. fiberglass using marine epoxy. Plans and kit are from Watersdancing.com and supplies from Boatcraft.com. This kayak was designed with wooden seats however, I decided to use the Delta seats as they can be easily adjusted fore and aft and the front seat removed if needed. These seats required some mounting modifications and the front seat had to be made narrower in order to accommodate the foot braces. The rudder is also from Delta and both seats and rudder were purchased from Boat Craft in Edmonton. Bottom was coated with two extra layers of epoxy/graphite (90%/10%) for abrasion protection. The finish has 4 coats of Pettit 2015 Flagship Marine Varnish
Music was provided by Bensound.com.
If you want to see her on the water, here is the link: https://youtu.be/wbPntfjyEqs

Видео Making a Stitch and Glue Duet 16 Kayak канала Andre Bachman