How to make and use a filing jig for knife blades.
My knives have changed and improved a lot since I made this video! For info on my latest knives see my website: http://store.goughcustom.com/
In this video I show you how to make and use a filing jig to file accurate and beautiful bevels on your blades!
I have used a jig like this to make all the knives I've created so far. It's an inexpensive, safe and accurate way of creating amazing bevels on your knives!
It's very safe to use so it's great for getting younger folk into knifemaking.
The tools needed to construct the jig are:
- Hacksaw
- Ruler
- Pencil
- Electric drill
- Center punch
- 1/8" drill bit
- 7/32" drill bit
- Dremel, angle grinder, bench grinder or belt sander for preparing the file (needed once only)
Materials:
- 1x 11x3.5x0.75" Plywood
- 1x 14.5x3.5x0.75" Plywood
- 1x 10.5x3.5x0.75" Plywood
- 4x #8 Wood Screws
- 2x 1/4-20 Stove bolts, 1-1/2" long
- 1x 3/8" steel rod 36" long
- 1x 1/4" eye-bolt. 2-6" long (ideally get a couple of different lengths)
- 1x 12" Double cut bastard file
- 1x Roll of electrical tape
- 2x 1" diameter screw-type hose clamps
This filing jig can be used for filing full flat grinds, high flat grinds, and scandi grinds. It can also be used for doing convex grinds by doing a faceted grind and then blending the facets together.
Видео How to make and use a filing jig for knife blades. канала Gough Custom
In this video I show you how to make and use a filing jig to file accurate and beautiful bevels on your blades!
I have used a jig like this to make all the knives I've created so far. It's an inexpensive, safe and accurate way of creating amazing bevels on your knives!
It's very safe to use so it's great for getting younger folk into knifemaking.
The tools needed to construct the jig are:
- Hacksaw
- Ruler
- Pencil
- Electric drill
- Center punch
- 1/8" drill bit
- 7/32" drill bit
- Dremel, angle grinder, bench grinder or belt sander for preparing the file (needed once only)
Materials:
- 1x 11x3.5x0.75" Plywood
- 1x 14.5x3.5x0.75" Plywood
- 1x 10.5x3.5x0.75" Plywood
- 4x #8 Wood Screws
- 2x 1/4-20 Stove bolts, 1-1/2" long
- 1x 3/8" steel rod 36" long
- 1x 1/4" eye-bolt. 2-6" long (ideally get a couple of different lengths)
- 1x 12" Double cut bastard file
- 1x Roll of electrical tape
- 2x 1" diameter screw-type hose clamps
This filing jig can be used for filing full flat grinds, high flat grinds, and scandi grinds. It can also be used for doing convex grinds by doing a faceted grind and then blending the facets together.
Видео How to make and use a filing jig for knife blades. канала Gough Custom
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Simple Yet Effective - Knife Sharpening Jig3 in 1 Knife Sharpening System — DIY Knife Sharpening JigMaking a knife with a 1 X 30 belt sander?DIY Knife Filing Jig For $20How To Make a Knife Bevel Jig For Knife Making. | Beginner Knife Making SeriesKnife Making: Filing the Bevel w/ Filing JigAngle Grinder Jig for knife makingHow To Make a Simple File Guide For Knife MakingKnife Making: The improved Bench Mounted Filing JigThe knife SHARPENING jig IIKnife grinding jig refinedHow to Satin Finish a Knife BladeHow To Sharpen a KnifeMaking a Knife from an Old FilePlunge Lines and Bevels - The Easy WayBevel Grinding JigMaking a knife with basic hand tools - Pt. 2 of 3Make a knife sharpening jigHow to make a knife filing jig, inspired by Gough Custom.$100 Harbor Freight Knife Shop!