(2/8) APM Mini 3.1 Video Series - Simple step by step power, motor and ESC setup. From Banggood.com
For the complete playlist click here - https://www.youtube.com/watch?v=Zv49LdcaLv0&list=PLYsWjANuAm4pCP3jjSAcmDJIEmyaEregs
Board available from http://www.banggood.com/MiniAPM-V3_1-Flight-Controller-With-Neo-6M-GPS-For-Multicopters-p-951861.html
Anti vibration mount available from http://www.banggood.com/CC3D-Flight-Controller-Anti-vibration-Plate-Mini-APM-Compatible-p-950396.html
In this second video in the APM 2.X series we look at how to connect the GPS, mount the board, how it’s powered, how to install the motors and calibrate the ESCs and perform a final check to ensure that everything is connected correctly.
We cover what JP2 (Jumper 2) does on the board, options to power the 3.1 and what to do if you can't power your board from the ESC connections.
Then we will look at a top tip about how you can avoid problems with crossed motor connections, how to calibrate the ESCs (using the short and longhand method) and finally a top tip for how to check that he motors are installed perfectly before the first hover test.
Thanks for watching, please LIKE and SUBSCIBE and Happy flying!
Видео (2/8) APM Mini 3.1 Video Series - Simple step by step power, motor and ESC setup. From Banggood.com канала Painless360
Board available from http://www.banggood.com/MiniAPM-V3_1-Flight-Controller-With-Neo-6M-GPS-For-Multicopters-p-951861.html
Anti vibration mount available from http://www.banggood.com/CC3D-Flight-Controller-Anti-vibration-Plate-Mini-APM-Compatible-p-950396.html
In this second video in the APM 2.X series we look at how to connect the GPS, mount the board, how it’s powered, how to install the motors and calibrate the ESCs and perform a final check to ensure that everything is connected correctly.
We cover what JP2 (Jumper 2) does on the board, options to power the 3.1 and what to do if you can't power your board from the ESC connections.
Then we will look at a top tip about how you can avoid problems with crossed motor connections, how to calibrate the ESCs (using the short and longhand method) and finally a top tip for how to check that he motors are installed perfectly before the first hover test.
Thanks for watching, please LIKE and SUBSCIBE and Happy flying!
Видео (2/8) APM Mini 3.1 Video Series - Simple step by step power, motor and ESC setup. From Banggood.com канала Painless360
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
(1/8) APM Mini 3.1 Video Series - Simple setup, config and calibration. Board from Banggood.comHow to calibrate ESC / Throttle of your Drone. How to make drone Part - 2(3/8) APM 2.5/2.6/3.1 - Troubleshooting APM armingHow to Calibrate an ESC in less than 5 Minutes (2020)APM 2.8 Durability Compilation | DIYLIFEHACKERZD550 with Pixhawk 2.4.8 buildAPM Mini Drone: Fail(2/3) APM Mini 3.1 setup for APM:Plane (Arduplane)How to make Drone at Home with Apm2.8 | Quadcopter | Indian LifeHackerNEW! HGLRC Thor battery 'smart' parallel charger and discharge gadgets!how to install blheli 30a 2 wire esc on apm 2.8 flight controller/2 wire esc on apm 2.8DIATONE Ripper R690: Maybe my new favourite mini wing?DIY 2.1 Power Amplifier TDA2030, TDA2050, LM1875APM 2.6/2.8 + Walkera G-2D gimbal: how to remote control TILT/PITCH axis - step by stepBuild 5.1 Channel Amplifier with Super Gainclone LM1875 x LM3886How to Install and Setup a GPS on your FPV Drone (4K)APM 3.1 Video Series - Simple 3DR/MAVlink radio setup and use(5/5) PixHawk Video Series – Common Power Options (BEC, Power Modules, ESCs and combos)ESC Calibration "All-at-once" method