LIS-02 Laser Induced Breakdown Spectroscopy
Thiết bị #LIBS quang phổ phát xạ laser LIS-02 được thiết kế để đo lường tỷ trọng khối lượng của các nguyên tố hóa học và xác định cấp mác của kim loại và hợp kim mà không cần sử dụng khí argon có độ tinh khiết cao.
https://saigonic.com/san_pham/lis-02-portable-laser-spectrometer/
The #LIS_02 #Laser_Induced_Breakdown_Spectroscopy is designed to measure the mass fraction of chemical elements and determination of grades of the metals and alloys without using high purity argon.
----------
Liên hệ: SaigonIC J.S.C
97 Đường Số 3, Cư Xá Lữ Gia, P.15, Q.11, Tp.Hồ Chí Minh
Email: thang.nd@saigonic.com – Hotline: 0938 456 654
Видео LIS-02 Laser Induced Breakdown Spectroscopy канала NDT Equipments _ Thiết Bị NDT
https://saigonic.com/san_pham/lis-02-portable-laser-spectrometer/
The #LIS_02 #Laser_Induced_Breakdown_Spectroscopy is designed to measure the mass fraction of chemical elements and determination of grades of the metals and alloys without using high purity argon.
----------
Liên hệ: SaigonIC J.S.C
97 Đường Số 3, Cư Xá Lữ Gia, P.15, Q.11, Tp.Hồ Chí Minh
Email: thang.nd@saigonic.com – Hotline: 0938 456 654
Видео LIS-02 Laser Induced Breakdown Spectroscopy канала NDT Equipments _ Thiết Bị NDT
Показать
Комментарии отсутствуют
Информация о видео
24 сентября 2022 г. 19:40:13
00:02:47
Другие видео канала
A1550 IntroVisor & A1525 Solo – Total Focusing Method using Multi SAFT technologylTesting of hole and notches on V1 block by the Multi-SAFT modeBiên Dạng Xung Các Khuyết Tật Cơ Bản – Basic Waveform Interpretation of Defects – SaigonICAngle Beam Calibration On V1 Block – ACS Ultrasonic Flaw DetectorsA1550 IntroVisor – Checking on RS BlockThiết bị đo chiều dày bằng sóng âm với model A1270 Ultrasonic Thickness GageA1210 to measuring of Small Diameter & Thin Wall TubesA1550 IntroVisor to Flat-Notch TestingA1210 Ultrasonic thickness gauge to measuring on the small-pipe with thin thicknessUT testing of Steel Structure Weld JointsA1207 PenGauge – Ultrasonic Thickness GaugeĐánh Giá Chất Lượng Vữa Rót Trong Ống Cáp Dự Ứng LựcA1020 Mira-Lite for Quality Assessment of Reinforced Concrete StructuresDefect Length Sizing using The 6dB Drop TechniqueA1550 IntroVisor – Testing of Stainless Steel WeldsA1550 IntroVisor – Using TFM & Multi SAFT TechnologiesHệ Thống Siêu Âm Chụp Cắt Lớp Tần Số Thấp A1040 MIRA 3D & 3D PROA1270 EMA – Testing of S7692 & S7694 TransducersLIS-01 Spectrometer on siteBasic Principles of Ultrasonic Testing – Nguyên Lý Cơ Bản của Kiểm Tra Siêu Âm