A1207 PenGauge – Ultrasonic Thickness Gauge
Với A1207 PenGauge bạn có thể làm được nhiều thứ mà bạn cần...
---
💡 Một mô hình #đo_chiều_dày_kim_loại_bằng_sóng_âm loại bỏ túi nhỏ gọn, kết hợp khả năng sử dụng và sự tiện lợi với các chức năng mới.
A model of the pocket-type ultrasonic thickness gauge combining usability and convenience with new functional capabilities.
💡 A1207 PenGauge được tích hợp sẵn đầu dò biến tử đơn với tần số 4 MHz và có thể tháo rời để thay thế bởi người dùng khi bị hỏng hóc.
The #1207_PenGauge having a built-in 4 MHz single element transducer and can removable to replacement by user in case of broken down.
💡 Đường kính nhỏ của bề mặt làm việc của đầu dò cho phép kiểm tra các đối tượng bề mặt bị ăn mòn với bán kính cong nhỏ từ 10 mm trở lên.
Small diameter of the working surface of the transducer allows testing of corroded surfaces objects with the curvature radius from 10 mm over.
💡 Khả năng #đo_chiều_dày_các_đối_tượng_kim_loại_và_nhựa_thông_qua_lớp_sơn_phủ có chiều dày 0.1 đến 0.3 mm mà không cần phải loại bỏ chúng.
Thickness measure capability of metal and plastic objects throu-paint/coating has thickness from 0.1 to 0.3 mm no need to removing.
---
Tham khảo thêm tại website: https://acs-international.com/product/pengauge/
Hoặc liên hệ: thang.nd@saigonic.com – 0938 456 654
Видео A1207 PenGauge – Ultrasonic Thickness Gauge канала NDT Equipments _ Thiết Bị NDT
---
💡 Một mô hình #đo_chiều_dày_kim_loại_bằng_sóng_âm loại bỏ túi nhỏ gọn, kết hợp khả năng sử dụng và sự tiện lợi với các chức năng mới.
A model of the pocket-type ultrasonic thickness gauge combining usability and convenience with new functional capabilities.
💡 A1207 PenGauge được tích hợp sẵn đầu dò biến tử đơn với tần số 4 MHz và có thể tháo rời để thay thế bởi người dùng khi bị hỏng hóc.
The #1207_PenGauge having a built-in 4 MHz single element transducer and can removable to replacement by user in case of broken down.
💡 Đường kính nhỏ của bề mặt làm việc của đầu dò cho phép kiểm tra các đối tượng bề mặt bị ăn mòn với bán kính cong nhỏ từ 10 mm trở lên.
Small diameter of the working surface of the transducer allows testing of corroded surfaces objects with the curvature radius from 10 mm over.
💡 Khả năng #đo_chiều_dày_các_đối_tượng_kim_loại_và_nhựa_thông_qua_lớp_sơn_phủ có chiều dày 0.1 đến 0.3 mm mà không cần phải loại bỏ chúng.
Thickness measure capability of metal and plastic objects throu-paint/coating has thickness from 0.1 to 0.3 mm no need to removing.
---
Tham khảo thêm tại website: https://acs-international.com/product/pengauge/
Hoặc liên hệ: thang.nd@saigonic.com – 0938 456 654
Видео A1207 PenGauge – Ultrasonic Thickness Gauge канала NDT Equipments _ Thiết Bị NDT
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
A1550 IntroVisor & A1525 Solo – Total Focusing Method using Multi SAFT technologylTesting of hole and notches on V1 block by the Multi-SAFT modeBiên Dạng Xung Các Khuyết Tật Cơ Bản – Basic Waveform Interpretation of Defects – SaigonICThickness Testing of Rubber Conveyor Belts by A1210 Ultrasonic Thickness GaugeAngle Beam Calibration On V1 Block – ACS Ultrasonic Flaw DetectorsA1550 IntroVisor – Checking on RS BlockThiết bị đo chiều dày bằng sóng âm với model A1270 Ultrasonic Thickness GageA1210 to measuring of Small Diameter & Thin Wall TubesA1550 IntroVisor to Flat-Notch TestingA1210 Ultrasonic thickness gauge to measuring on the small-pipe with thin thicknessUT testing of Steel Structure Weld JointsĐánh Giá Chất Lượng Vữa Rót Trong Ống Cáp Dự Ứng LựcA1020 Mira-Lite for Quality Assessment of Reinforced Concrete StructuresLIS-02 Laser Induced Breakdown SpectroscopyDefect Length Sizing using The 6dB Drop TechniqueA1550 IntroVisor – Testing of Stainless Steel WeldsA1550 IntroVisor – Using TFM & Multi SAFT TechnologiesHệ Thống Siêu Âm Chụp Cắt Lớp Tần Số Thấp A1040 MIRA 3D & 3D PROA1270 EMA – Testing of S7692 & S7694 TransducersLIS-01 Spectrometer on site