Why Turbo 4.3L V6!?! Just LS Swap it!!!!
Welcome to the introduction of my YouTube Channel!
I plan on posting lots of information about the process of building my 2003 GMC Sonoma into a street/strip vehicle.
The truck came with a completely stock 4.3L V6 engine, 4L60E transmission, and a drum brake 7.5" 10 bolt rear axle. I bought it with 122k miles
It came already modified with a Garrett GT3582R turbo and custom turbo kit already installed and running. It had a custom 3" stainless exhaust with a Magnaflow muffler. The engine was modified with an intake manifold that was mean't for marine applications (boats) to be able to upgrade the injectors from the standard spider injection. This manifold was installed with 42lb/hr (green giant) injectors.
The suspension was also modified all around. It had Belltech 2" drop spindles along with 3" drop springs in the front and Caltrac split mono leaf springs and Caltrac traction bars.
I have a handful of parts to upgrade the truck, and plenty of ideas for more upgrades in the future. I hope you all will subscribe to follow along with the progress of the build.
Thanks!
Видео Why Turbo 4.3L V6!?! Just LS Swap it!!!! канала turbo_v6
I plan on posting lots of information about the process of building my 2003 GMC Sonoma into a street/strip vehicle.
The truck came with a completely stock 4.3L V6 engine, 4L60E transmission, and a drum brake 7.5" 10 bolt rear axle. I bought it with 122k miles
It came already modified with a Garrett GT3582R turbo and custom turbo kit already installed and running. It had a custom 3" stainless exhaust with a Magnaflow muffler. The engine was modified with an intake manifold that was mean't for marine applications (boats) to be able to upgrade the injectors from the standard spider injection. This manifold was installed with 42lb/hr (green giant) injectors.
The suspension was also modified all around. It had Belltech 2" drop spindles along with 3" drop springs in the front and Caltrac split mono leaf springs and Caltrac traction bars.
I have a handful of parts to upgrade the truck, and plenty of ideas for more upgrades in the future. I hope you all will subscribe to follow along with the progress of the build.
Thanks!
Видео Why Turbo 4.3L V6!?! Just LS Swap it!!!! канала turbo_v6
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Squeezing V8 Horsepower Out Of The S10's 4.3 V6 With A Supercharger Install - Trucks S2, E3A 4.3 V6 CHEVY ENGINE, A TURBO AND A VERY FAST LUV TRUCK!Minor Upgrades Create Crazy Power on a Junkyard 5.3L Vortec - Engine Power S7, E1098 S10 Vortec V6 Throttle Body Mod "Free HP"800+hp LT4/10spd swapped 1993 truck street pulls! Its absolutely UNREAL!!LS Swapping a S10: What You Need/Parts ListGM S10, S15 and Sonoma Coilover Suspension InstallationSupercharged Godzilla 7.3L Ford V8 Makes Insane Horsepower | Listen to this Whipple Roar on the DynoNitrous/Cam 6.0 S10 vs Nitrous/Heads/Cam C10Small-Block Turbo Kit for $699! But Does it Work?Dyno Day - How Much Can A Stock 4.3L V6 Motor Take?GMC Sierra 4.3L V6: FLOWMASTER SUPER 10 Vs STRAIGHT PIPES!STORM BREAKER!! HAMMERING THE 4.3L CHEVY (ASTRO VAN) V6 WITH BOOST!Top 5 Problems Chevy S-10 ZR2 Truck 2nd Generation 1994-04Cast Aluminum Weld Prep - Custom 4.3L V6 Intake Manifold Ep2CHEVY S10 - Everything You Need to Know | Up to SpeedHow To LS Swap: Budget S10 in 2021 / What You Need to Get Started on Your SwapS10 V6 4.3l Turbo 1/4 Mile - 11.93 @ 117.84.3L VORTEC V6 VS 4200 ATLAS INLINE 6 (VORTEC VS AMERI-BARRA)Silverado Cold Air Intake & Throttle Body Mod 4.3 Vortec V6