DIY CO2 Citric Acid and Baking Soda | High Pressure DIY CO2 Generator System

Video tutorial on how to make DIY CO2 Generator using Citric Acid and Baking Soda.
Subscribe : https://goo.gl/J4sgjG

This CO2 Generator kit is made of two bottles of pressurized soft drinks (Sprite). Each contains 1.5 liters but can also use bottles with a volume of 2 liters or more.

Each bottle contains different liquid. The first bottle contains mixture of water and citric acid, the second bottle contains mixture of water and baking soda.

When the two liquids are mixed, a chemical reaction will occur and produce carbon dioxide (CO2) gas. This gas is used for aquasacpe plants in water.

The materials needed to make DIY CO2 are:
1. Two bottles of soft drink pressurized with a volume of 1.5 liters.
2. Pressurized 6 mm plastic hose.
3. Y or L - hose connector.
4. L - hose connector.
5. Two molded bottle top with tube retainers.
6. Needle Valve.
7. Check Valve.
8. Bubble Counter.
9. Co2 Diffuser.
10. Water (400 ml for citric acid, 200 ml for baking soda).
11. 200 gram citric acid.
12. 200 gram baking soda.

This system can produce Co2 for 7-10 days depending on the number of bubbles that come out.

NOTE:
Correction: At 5:07 minutes should be 200 ml of water

Although Co2 is good for aquascape plants, but if too much it will have a negative impact on fish and other animals that do not need Co2. Therefore Co2 expenditure must be adjusted based on needs.

DIY CO2 Generator System Using Sugar and Yeast:
https://youtu.be/SyyYK3OVBYw

CO2 Diffuser from check valve:
https://youtu.be/gpIzRvadW08

CO2 Bubble Counter and Diffuser from Syringe:
https://youtu.be/NvBLqIlHVCM

More videos in HK Channel:
https://www.youtube.com/hasnahkamilah

Видео DIY CO2 Citric Acid and Baking Soda | High Pressure DIY CO2 Generator System канала Hasnah Kamilah