Raspberry Pi with HiFi-Pi #3 digital amplifier, 2x60W SSM3582x2
►►Hi-Fi-Pi №3, PasPi AMP◄◄
https://www.chipdip.ru/product0/9000745256
Digital stereo amplifier for Raspberry Pi microcomputers is based on two SSM3582 (supported by ChipStudio) ICs designed in mono mode (double mono). The amplifier integrates unique controller that allows to playback true Hi-Res premium quality audio from Raspberry Pi without resampling. No special Linux knowledge needed. Hi-Fi-Pi N3 is connected to 40-pin GPIO connector of Raspberry Pi1 Model B+, Raspberry Pi2, Raspberry Pi3 or Raspberry Pi4 without soldering and does not require auxiliary power supply.
Features
Module is completely assembled, programmed and ready to be used with any 40-pin Raspberry Pi microcomputer
Volumio / OSMC / Max2Play / RuneAudio / Moode / PiCorePlayer / PiMusicBox / OpenELEC / Roon Ready compliant
Slave mode
No additional drivers and “config” file changes needed
2×62.4 W output to 2 Ω loads
Proprietary, filterless Σ-Δ modulation
PCM data format: I2S
Sampling frequencies: 44.1 kHz, 48 kHz, 88,2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Resolution: 16, 24 or 32 bits for each sampling frequency
Automatic resolution / frequency selection in accordance to resolution / frequency of input audio stream
Possibility of downloading user projects created by means of SigmaStudio and ChipStudio
THD+N (5 W into 8 Ω loads): 0,004%
Power supply voltage: 8 V to 16 V
Amplifier board dimensions: 56 x 65 mm
Control board dimensions: 40 x 85 mm
Programmed adjustments
Volume: 0 … -70 dB
Balance: ± 10 dB
Mute: -70 dB, all channels
Mute state indication: LED blinks at frequency 4 Hz
Embedded limiter
Clipping state indication: left LED under volume control
Limiter activity indication: right LED under volume control
Recommended power supply: GST60A15-P1J
►►All Raspberry Pi HAT◄◄
https://www.chipdip.ru/catalog-show/for-you-projects
►►Our everything◄◄
https://www.chipdip.ru/catalog/just-do-it
Creative Commons - Attribution - Share Alike license.
#raspberrypi #digitalaudio #volumio
Видео Raspberry Pi with HiFi-Pi #3 digital amplifier, 2x60W SSM3582x2 канала Чип и Дип
https://www.chipdip.ru/product0/9000745256
Digital stereo amplifier for Raspberry Pi microcomputers is based on two SSM3582 (supported by ChipStudio) ICs designed in mono mode (double mono). The amplifier integrates unique controller that allows to playback true Hi-Res premium quality audio from Raspberry Pi without resampling. No special Linux knowledge needed. Hi-Fi-Pi N3 is connected to 40-pin GPIO connector of Raspberry Pi1 Model B+, Raspberry Pi2, Raspberry Pi3 or Raspberry Pi4 without soldering and does not require auxiliary power supply.
Features
Module is completely assembled, programmed and ready to be used with any 40-pin Raspberry Pi microcomputer
Volumio / OSMC / Max2Play / RuneAudio / Moode / PiCorePlayer / PiMusicBox / OpenELEC / Roon Ready compliant
Slave mode
No additional drivers and “config” file changes needed
2×62.4 W output to 2 Ω loads
Proprietary, filterless Σ-Δ modulation
PCM data format: I2S
Sampling frequencies: 44.1 kHz, 48 kHz, 88,2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Resolution: 16, 24 or 32 bits for each sampling frequency
Automatic resolution / frequency selection in accordance to resolution / frequency of input audio stream
Possibility of downloading user projects created by means of SigmaStudio and ChipStudio
THD+N (5 W into 8 Ω loads): 0,004%
Power supply voltage: 8 V to 16 V
Amplifier board dimensions: 56 x 65 mm
Control board dimensions: 40 x 85 mm
Programmed adjustments
Volume: 0 … -70 dB
Balance: ± 10 dB
Mute: -70 dB, all channels
Mute state indication: LED blinks at frequency 4 Hz
Embedded limiter
Clipping state indication: left LED under volume control
Limiter activity indication: right LED under volume control
Recommended power supply: GST60A15-P1J
►►All Raspberry Pi HAT◄◄
https://www.chipdip.ru/catalog-show/for-you-projects
►►Our everything◄◄
https://www.chipdip.ru/catalog/just-do-it
Creative Commons - Attribution - Share Alike license.
#raspberrypi #digitalaudio #volumio
Видео Raspberry Pi with HiFi-Pi #3 digital amplifier, 2x60W SSM3582x2 канала Чип и Дип
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Raspberry PI, DAC and AMP, SupTronics X5000. OSMC. GearBestSimple & Powerful Stereo Bass Amplifier // How to Make Stereo Amplifier with D718 TransistorRaspberry Pi with ALLO DigiOne Signature - a rewind and a reviewWhich HiFiBerry is the right one for you?Top 20 Raspberry Pi projects you must try in 2021!Raspberry Pi 4 TerraPi RigHiFiPi #0 & VolumioHiFiPi #1 | Цифровой усилитель для Raspberry Pi 2x50Вт на SSM3582Car Diagnostics With A Raspberry PI - DIY Smart Car (Part 3)#295 Raspberry Pi Server based on Docker, with VPN, Dropbox backup, Influx, Grafana, etc: IOTstackStereo DAC for Raspberry Pi with subwoofer channels, 2 x PCM5242Irrigation system based on Raspberri PI - cheap and easyVoltlog #264 - Passive Heatsink Cooling For The Raspberry Pi 4We Built a DIY Sonos-Style Raspberry PI Based Audio Amplifier for $158.10All-in-One Raspberry Pi Super Budget SystemSetting up Volumio the Audiophile Music Player on UnraidPi Projector by MickMake | The Raspberry Pi Zero Pocket ProjectorRaspberry PI effects plugins vs. ZOOM MS100BTSpeaker production Part 1 of 13