Home made gauges : Interfacing tutorial
(Sorry for my English …)
After the last video concerning my home-made gauges, I've had many requests for tutorials and code sharing. Unfortunately, my code is related with other parts of my cockpit (lua scripts, sioc …) and it would be quite complicated to extract only Arduino related parts.
So, I’ve decided to make this short video with some very basic examples of wiring and programming which could be used for a flaps indicator gauge.
Arduino libraries used in this tutorial are AccelStepper (for stepper motor control), Wire (for I2C communication between two cards) and OACSP (link FS or P3D with Arduino).
Sketches, libraries links and components references are available here :
http://laap.atc.free.fr/download/YT_Home_Made_Gauges_examples.rar
I hope this will help everyone who try to interface Arduino boards with FS or P3D.
Thanks to all for your mails and your comments :-)
Видео Home made gauges : Interfacing tutorial канала Frederic_320
After the last video concerning my home-made gauges, I've had many requests for tutorials and code sharing. Unfortunately, my code is related with other parts of my cockpit (lua scripts, sioc …) and it would be quite complicated to extract only Arduino related parts.
So, I’ve decided to make this short video with some very basic examples of wiring and programming which could be used for a flaps indicator gauge.
Arduino libraries used in this tutorial are AccelStepper (for stepper motor control), Wire (for I2C communication between two cards) and OACSP (link FS or P3D with Arduino).
Sketches, libraries links and components references are available here :
http://laap.atc.free.fr/download/YT_Home_Made_Gauges_examples.rar
I hope this will help everyone who try to interface Arduino boards with FS or P3D.
Thanks to all for your mails and your comments :-)
Видео Home made gauges : Interfacing tutorial канала Frederic_320
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Dual needle gauge - Prototype development5-min Tutorials: Arduino IR Remote & Receiver#12 Five Tricks for working with Dupont wiresaileron and flap movementInterfacing Arduino with Flight Simulator- TutorialMaking Flight Sim Panels with my eBay LaserGeneric Gauge Development Kit - Unboxing and Assembly tutorialHow To Wire It! Buttons & SwitchesHome made Gauges for FS or P3DHow to control 12V devices with Arduino. Using Relay vs Using MOSFET transistorUsing Air Manager in my HomecockpitBack to basics and upcoming video teaserArduino and Aircore Gauge Success!SimVimCockpit (RSC) - Gauge Calibration/MappingBasic SimVim Cockpit Wiring (Old: New videos are being uploaded)How to make a Magnetic Compass for FSX | Captain BobHow to make flight simulator panels that are backlitArduino stepper tachometer for a Kawasaki KZ1000Homemade C172 simulator - The journey so farHome made gauges : Generic development kit based on X27 stepper