Dual needle gauge - Prototype development
An informative accelerated video to show all steps of a prototype development, from the design to a fully working dual needle gauge interfaced with P3D.
Real time for development and interfacing : 10 days
Hope this will help some cockpit builders to create their own gauges ... even if it's far from being a tutorial !
Of course this is only a prototype, the final version will be released soon ... and will hopefully be interfaced with more specific drivers.
Note : Of course I've no bear at home (18:32) only some beers in the fridge !
Timeline :
- 3D modeling : 0:10
- PCB design : 1:21
- PCB etching : 3:46
- Plexiglass laser cut : 6:05
- 3D printed parts : 8:18
- Pattern printing : 10:02
- Pattern manual cut : 12:12
- Pattern overlay : 13:15
- Pattern glue : 14:06
- Pattern laser cut : 14:44
- Gauge assembly : 16:08
- Stepper test : 17:26
- P3D interface test : 18:43
Видео Dual needle gauge - Prototype development канала Frederic_320
Real time for development and interfacing : 10 days
Hope this will help some cockpit builders to create their own gauges ... even if it's far from being a tutorial !
Of course this is only a prototype, the final version will be released soon ... and will hopefully be interfaced with more specific drivers.
Note : Of course I've no bear at home (18:32) only some beers in the fridge !
Timeline :
- 3D modeling : 0:10
- PCB design : 1:21
- PCB etching : 3:46
- Plexiglass laser cut : 6:05
- 3D printed parts : 8:18
- Pattern printing : 10:02
- Pattern manual cut : 12:12
- Pattern overlay : 13:15
- Pattern glue : 14:06
- Pattern laser cut : 14:44
- Gauge assembly : 16:08
- Stepper test : 17:26
- P3D interface test : 18:43
Видео Dual needle gauge - Prototype development канала Frederic_320
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to Make an Altimeter for a Flight Simulator with MobiFlight | Captain Bob](https://i.ytimg.com/vi/YhThtm_ZIwE/default.jpg)
![3D Printer DIY with FLOPPY DRIVER and old DVDROM](https://i.ytimg.com/vi/QT3dAxqICC8/default.jpg)
![Generic wet compass](https://i.ytimg.com/vi/_gxO6gFXiZk/default.jpg)
![Making Flight Sim Panels with my eBay Laser](https://i.ytimg.com/vi/GWwiDnhjQlo/default.jpg)
![Generic Gauge Development Kit - Unboxing and Assembly tutorial](https://i.ytimg.com/vi/1BZD57Ts6O0/default.jpg)
![The Complete Left Console- A10C Warthog Simulator](https://i.ytimg.com/vi/U8UAk-PM1p8/default.jpg)
![DIY 3D Printed Flight Yoke for 2020 Microsoft Flight Simulator](https://i.ytimg.com/vi/nO-lanEc5vM/default.jpg)
![A Sim is born - Making of a Beechcraft Baron G58 Flight Simulation Home Cockpit Panel](https://i.ytimg.com/vi/IM22DkBLK6Y/default.jpg)
![Saitek Yoke Mod](https://i.ytimg.com/vi/4UO1MKB1kXg/default.jpg)
![Ten Awesome 3D-Printable Gifts](https://i.ytimg.com/vi/p7-wedCPSHE/default.jpg)
![Word Clock Part 2 - v2.0 Of 3D Printed Frame And Software!!!](https://i.ytimg.com/vi/fYtS_n_GhCY/default.jpg)
![Curved Screen Upgrade! 270 Degree Wrap Around!](https://i.ytimg.com/vi/PLd-00W2HEg/default.jpg)
![5 3D Printing Mistakes you WILL make - and how to avoid them! 3D Printing 101](https://i.ytimg.com/vi/aWg1nG2AbA8/default.jpg)
![Dual Needle Gauge - A Boeing 737-800 Homecockpit #49](https://i.ytimg.com/vi/OynIiiBWVZM/default.jpg)
![Home made gauges : Generic development kit based on X27 stepper](https://i.ytimg.com/vi/fb_6pLyaG28/default.jpg)
![3D Printing for Beginners](https://i.ytimg.com/vi/8Dqo8QhuMYw/default.jpg)
![Unboxing of Simionic G1000 bezel and first runup with integrated iPad](https://i.ytimg.com/vi/-25IZ6g0bKg/default.jpg)
![Make a Simulator QUICKLY with Air Manager](https://i.ytimg.com/vi/z_MFkWfTwTQ/default.jpg)
![DIY Flightsim EFIS panel: creating a rotary encoder / band switch combi](https://i.ytimg.com/vi/nJQa-gDUHyY/default.jpg)
![Use FS2020 with an Arduino: MobiFlight Installation](https://i.ytimg.com/vi/9Ot8EALj99o/default.jpg)