Beginner knife making part 3, Grinding the bevel on a knife
Beginner knife making part 3, Grinding the bevel on a knife.
G'day and welcome to a new series on making a beginner knife.
This is a simple little knife that is a copy of the first knife that I personally made, it has a very simple design that I first drew onto a piece of steel from a kit that i had purchased. The design was simple and made to fit the piece of steel I had by all means copy it or look at the references below.
Today is the grinding the bevels on the blade, I use a 2x60" grinder and a bevel jig to achieve this as discussed in the video do freehand grind as well but with a simple bevel as on this knife will tend to go with using the jig. I also feel that jigs make achieving acceptable grinds for a knife that you are going to sell much easier for the beginner.
Thank you for watching
FaceBook groups I mention:
Knife making a Hobby
https://www.facebook.com/groups/23113720648
Australian Beginner Knife Making
https://www.facebook.com/groups/ABKMG
Australian Blacksmiths and Knife Makers
https://www.facebook.com/groups/1381470675432619
Dan's Website on knife designs
https://dcknives.blogspot.com/
Creativeman Website
https://creativeman.com.au/
Artisan Supplies Website
https://www.artisansupplies.com.au/
Note I do not get any payment and am not professionally linked to any of these groups, I simply use their services.
Heck I spend a lot of money on the hobby same as most other makers
Any questions that you have about custom knives feel free to contact me via:
Email
mailto:darren@downunderfarmandforge.com
Webpage
https://downunderfarmandforge.com/
Facebook
https://www.facebook.com/DownunderFarmandForge/
Music: Rain
Musician: @ikonmusic
Disclaimer:
The use of Power and electrical tools and devices can be dangerous, please seek professional training before undertaking to do so.
Any tools or techniques shown hers are purely as I do it and for illustration purposes only, they are not professional training and should not be considered so.
Видео Beginner knife making part 3, Grinding the bevel on a knife канала Downunder Farm and Forge
G'day and welcome to a new series on making a beginner knife.
This is a simple little knife that is a copy of the first knife that I personally made, it has a very simple design that I first drew onto a piece of steel from a kit that i had purchased. The design was simple and made to fit the piece of steel I had by all means copy it or look at the references below.
Today is the grinding the bevels on the blade, I use a 2x60" grinder and a bevel jig to achieve this as discussed in the video do freehand grind as well but with a simple bevel as on this knife will tend to go with using the jig. I also feel that jigs make achieving acceptable grinds for a knife that you are going to sell much easier for the beginner.
Thank you for watching
FaceBook groups I mention:
Knife making a Hobby
https://www.facebook.com/groups/23113720648
Australian Beginner Knife Making
https://www.facebook.com/groups/ABKMG
Australian Blacksmiths and Knife Makers
https://www.facebook.com/groups/1381470675432619
Dan's Website on knife designs
https://dcknives.blogspot.com/
Creativeman Website
https://creativeman.com.au/
Artisan Supplies Website
https://www.artisansupplies.com.au/
Note I do not get any payment and am not professionally linked to any of these groups, I simply use their services.
Heck I spend a lot of money on the hobby same as most other makers
Any questions that you have about custom knives feel free to contact me via:
mailto:darren@downunderfarmandforge.com
Webpage
https://downunderfarmandforge.com/
https://www.facebook.com/DownunderFarmandForge/
Music: Rain
Musician: @ikonmusic
Disclaimer:
The use of Power and electrical tools and devices can be dangerous, please seek professional training before undertaking to do so.
Any tools or techniques shown hers are purely as I do it and for illustration purposes only, they are not professional training and should not be considered so.
Видео Beginner knife making part 3, Grinding the bevel on a knife канала Downunder Farm and Forge
Показать
Комментарии отсутствуют
Информация о видео
16 августа 2020 г. 6:27:34
00:09:22
Другие видео канала
Stock Removal Knife Tutorial - Pt. 2 - Grinding The Bevels - Knife MakingKnife making for the beginner (part2) Grinding BevelsNo Weld Knife Making Bevel Grinding JigHow to make and use a filing jig for knife blades.How To Grind A Knife Step By Step!5 Tips for Grinding Better Bevels on Your Knives - Grind like a Pro!Knife Making Tutorial: Plunge LinesUsage of TR MAKER Knife JigBevel Grinding: Knife Making Build-Along #3Grinding better bevels!!! Free hand Knife grinding tips and tricks.Grinding knife bevelsKnife Grind Basics! Hollow, Flat, Scandi, Convex, and Chisel GrindsKnife Making: Belt Grinding Problems...and How to Fix Them!Trollsky budget grinding jigPlunge Lines and Bevels - The Easy WayMaking a knife with a 1 X 30 belt sander?The Easiest And Cheapest Grinding Jig for Knife Making In The World #knife #knifemakingBevel grinding tip for the 1x30 grinderBeginner knife making part 5, cutting knife handle scales.Knife Grinding Jig - DIY PERFECT BEVELS