Nanolongrange V2 - single 18650 FPV drone with GPS

Here is the improved version of my Nanolongrange FPV drone frame. The .stl file for 3d printing the frame can be downloaded for free on Thingiverse: https://www.thingiverse.com/thing:4818009 I'm very happy with the results. Next upgrades will focus on the FPV system (different antennas and new RX module). Update: for more range set the VTX to higher power levels (as far as your local regulations allow +25mW). I will also test 21700 batteries and the Insta360 Go 2 on this frame.
0:00-0:16 3d printing the frame
0:17-0:58 design evolution
0:59-1:09 GNB27 connector
1:10-1:40 Immersion RC Ghost Zepto
1:41-1:59 connecting Rx and GPS to FC
2:00-2:19 installing FC
2:20-2:30 installing Rx T-antenna
2:31-3:18 installing motors
3:19-3:35 installing FPV camera
3:36-3:49 installing GPS
3:50-4:08 overview
4:09-4:24 Betaflight setup
4:25-4:40 mounting 18650 battery
4:41-4:51 AUW weight
4:52-5:13 final check/indoor flight
5:14-5:54 first outdoor test
5:55-6:35 fighting strong winds
6:36-8:21 full battery test
8:22-8:37 landing
http://on.fb.me/unboxingexperience

Видео Nanolongrange V2 - single 18650 FPV drone with GPS канала Unboxingexperience7