How I Converted My Nanohawk into Something AMAZING! (with 40mm PROPS)

I converted my EMAX Nanohawk to a toothpick-style drone and increased the prop size to 40mm. It’s super fun! I call it my "NanoBug"! Parts list and links below.

If you want to help support this channel, use any of these affiliate links when you shop for FPV gear. Thanks!
Banggood: http://bit.ly/2OVcf1r
BetaFPV: http://bit.ly/betafpv-shutterbug
GetFPV: http://bit.ly/2Ot4q2K
Heli-Nation: http://bit.ly/heli-nation

Here's my review of the EMAX Nanohawk, in case you haven't seen it:
https://youtu.be/wnb2eKkTGa8

STL Files:
https://www.thingiverse.com/thing:4779696

Parts List (affiliate links, when available):
- EMAX Nanohawk BNF drone: http://bit.ly/3rxQJkt
- EMAX 300mah 1S batteries: http://bit.ly/3qxJo2Q
- BeeBrain V2 Canopy: http://bit.ly/37qLvMd
- HQ 40mm 2-blade props: http://bit.ly/3vjbz9B
- Reny M2 12mm screws (cut to length or use metal screws): https://bit.ly/3au3KD5

PowerPlay DVR used to record 60Hz FPV:
http://bit.ly/power-play-dvr

CLI to rotate board and remap motor (also requires correct motor direction in ESC firmware):
resource MOTOR 1 B07
resource MOTOR 2 B08
resource MOTOR 3 B10
resource MOTOR 4 B06
set align_board_yaw = 90
set yaw_motors_reversed = ON

Music:
“Future Pop” by Roman Senyk Music (Creative Commons License)
“Get Tough” by Track Tribe (YouTube Audio Library)

Видео How I Converted My Nanohawk into Something AMAZING! (with 40mm PROPS) канала Mr ShutterBug