APM 2.5/2.6/2.7 - Adding an OSD for FPV using MinimOSD - complete setup
You can watch all of the APM setup videos here - https://www.youtube.com/watch?v=30cCs4aHdB0&list=PLYsWjANuAm4oswLMu9OU8yOm-9J6y30XW&index=1
In this video we add an OSD to an APM 2.6 (also works on 2.5 and 2.7) using the telemetry port on the flight controller itself. no changes are needed to the firmware of setup on the board to do this just the great little $12 board and some cables.
In this video I cover what software you need, how you setup the board so it shows what you want, where you want it and how you cable it up to the APM and your camera and video transmitter.
In this video I cover:
- What you need (0.03)
- Why you will need an FTDI adapter (0:34)
- Downloading the software you need (2:51)
- Flashing the firmware and setup (4:58)
- Configuring the MinimOSD (6:09)
- Wiring to the APM (10:23)
- Best practice for the power system on the MinimOSD (11:20)
- Wiring to the camera and video transmitter (13:21)
- Wiring the entire system up (14:43)
Thanks for watching please LIKE and SUBSCRIBE!
Happy flying!
Видео APM 2.5/2.6/2.7 - Adding an OSD for FPV using MinimOSD - complete setup канала Painless360
In this video we add an OSD to an APM 2.6 (also works on 2.5 and 2.7) using the telemetry port on the flight controller itself. no changes are needed to the firmware of setup on the board to do this just the great little $12 board and some cables.
In this video I cover what software you need, how you setup the board so it shows what you want, where you want it and how you cable it up to the APM and your camera and video transmitter.
In this video I cover:
- What you need (0.03)
- Why you will need an FTDI adapter (0:34)
- Downloading the software you need (2:51)
- Flashing the firmware and setup (4:58)
- Configuring the MinimOSD (6:09)
- Wiring to the APM (10:23)
- Best practice for the power system on the MinimOSD (11:20)
- Wiring to the camera and video transmitter (13:21)
- Wiring the entire system up (14:43)
Thanks for watching please LIKE and SUBSCRIBE!
Happy flying!
Видео APM 2.5/2.6/2.7 - Adding an OSD for FPV using MinimOSD - complete setup канала Painless360
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Ardupilot APM 2.6 Wiring, MinumOSD, APM Telemetry Radio, Power Module - XUAV Mini Talon FPV Part 4Micro MinimOSD EASY Step-By-Step Tutorial | FPV OSDDIY drone (Part Two) | S500 | Pixhawk | FPV Quadcopter |How to setup a minimOSD for APM or PixhawkFPV Series Episode 6: Simple OSD WiringFPV Part 5: 3DR APM 2.6 Setup for Power Module and MinimOSD Battery Voltage.HOW-TO Matek F405 Wing with ArduPlane + full setup (on the X-UAV Clouds)A to Z Detail Of Pixhawk Flight Controller | Pixhawk Controller Review - Drone Flight ControllerMIssion Planner Secrets and Hidden FeaturesAPM Mini 3.1 - Adding an OSD for FPV using MinimOSD - complete setupLong Range FPV Ground Station - Build TutorialHow to program DJI NAZA M-LITE Drone / Quadcopter l ड्रोन को प्रोग्राम कैसे करे ?APM Telemetry MinimOSD Wiring, Firmware Load, and Configurationt on TBS Discovery FrameWHAT IS OSD?? FPV On Screen Display Explained for BeginnersAKK X2 Ultimate 1200mW Vtx long range test (oh, it is GOOD!)RC Overview: Runcam Swift II FPV CameraHow to get Spektrum RSSI in Betaflight OSDChoosing Video Transmitters (VTX) for FPVMinim OSD Micro: How To Flash MW OSD Firmware(4/8) APM 2.5/2.6/3.1 - Introduction to flight modes (stabilize, loiter, RTL etc)