Chambering
Chambering of a rifle barrel in .308. Here is the step by step process of how and why we do what we do. This is a process that must be done slowly and correctly. Not a job for an amateur!
Видео Chambering канала High Speed Shooting Systems
Видео Chambering канала High Speed Shooting Systems
Показать
Комментарии отсутствуют
Информация о видео
30 августа 2014 г. 4:42:00
00:16:17
Другие видео канала
Receiver truing and Barrel threading with timing
Bolt Truing
Cut Riflng on HAAS TL 2
Building a Better Rifling
Chambering a new barrel for the wife's rifle (PT 2). 6.5 Creedmoor
Precision Matthews PM-1440GT Lathe In-Depth Walkthrough and Demo
Single Point Threading a tapered 22 Rifle Barrel on the Lathe.
Forging a gun barrel
Machining Large Undercuts on the Lathe with Less Chatter
Button Rifling Press - Home Built
Custom Cylinder Build Continued
300 PRC Custom Build: Chambering and Machining the Barrel
Setting up a gun barrel in the lathe
Live Pilot Reamer and Indicating Rod and Bushings by PTG
Get Your Steady Rest Aligned
Reaming a 1.375 inch hole.
Thread Cutting on the Grizzly G4003 Lathe
"CHAINSAW" GO KART! - PART 2
INTEGRAL RIFLE BARREL FROM BLANK
SNS 225 Part 1: Headstock & Tailstock Alignment, Starrett Wall Charts