KK2.0 Self level setup, trimming and review with firmware v1.6
Summary of the way to correct any drift in self level -
- If the model drifts forward the correct using positive pitch trim
- If the model drifts backwards the correct using negative pitch trim
- If the model drifts left the correct using positive pitch trim
- If the model drifts right the correct using negative pitch trim
The audio on this video seems to have gone very quiet, I can't fix it without reloading so apologies for anyone who is having trouble hearing the voiceover..
I've been disappointed with the self level on the KK 2.0 board in the early days and even had a crash as a direct result. I used V1.4 originally and the self level made the controls feel very disconnected and if you switched into self level in flight would dip its nose and take off into the distance.
Version 1.6 of the firmware is out now and the forums said that the self-level feature was greatly improved. In this video I show you how to setup the self-level on a quad and see how it performs on version 1.6 of the firmware.
In summary -- if you are frustrated by the self level on the KK2.0 board and are using an older version of the firmware then it is worth considering upgrading and going to the trouble of setting everything up correctly, expecially if you are new to Quads or want a more stable FPV platform.
Видео KK2.0 Self level setup, trimming and review with firmware v1.6 канала Painless360
- If the model drifts forward the correct using positive pitch trim
- If the model drifts backwards the correct using negative pitch trim
- If the model drifts left the correct using positive pitch trim
- If the model drifts right the correct using negative pitch trim
The audio on this video seems to have gone very quiet, I can't fix it without reloading so apologies for anyone who is having trouble hearing the voiceover..
I've been disappointed with the self level on the KK 2.0 board in the early days and even had a crash as a direct result. I used V1.4 originally and the self level made the controls feel very disconnected and if you switched into self level in flight would dip its nose and take off into the distance.
Version 1.6 of the firmware is out now and the forums said that the self-level feature was greatly improved. In this video I show you how to setup the self-level on a quad and see how it performs on version 1.6 of the firmware.
In summary -- if you are frustrated by the self level on the KK2.0 board and are using an older version of the firmware then it is worth considering upgrading and going to the trouble of setting everything up correctly, expecially if you are new to Quads or want a more stable FPV platform.
Видео KK2.0 Self level setup, trimming and review with firmware v1.6 канала Painless360
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
KK2.0 Multicopter ESC Calibration, Motor Layout, and Auto-Level w/ Default Settings on AeroSky QuadKK2 Setup video - TricopterAdd Auto-leveling and Stabilization to Your RC Plane using HobbyKing KK2.0 BoardKK2.0 Multicopter PI Gain Tuning for BeginnersSelf level selection on KK2 0KK2 1 5 FLIGHT CONTROLLER SETTINGSKK2 Autolevel Tuning and ExplanationHobbyking's KK2: QUICK START TUNING GUIDEHow to Setup KK2.1.5 BoardHow to make a powerfull and high range Quadcopter-drone at home Full tutorial-with|kk2.1.5 setup.How to Setup KK2.1.5 |Best Setting's | Proknow(Part-2)How to Flip a Quadcopter - KK2 Stick Scaling | Flite TestHow to make Quadcopter at Home - Make a DroneYMFC-3D part 5 – Quadcopter PID controller and PID tuning.Quadcopter X & HK KK2.0 FW V1.5 Vol.49 Test FlightUpdated H-King Super Kinetic 815mm PlaneHow to Setup kk 2.1 Self level and Mode settingHow to make a Cheapest Drone with KK2.1.5 at Home in Hindi | Full Tutorial | Indian LifeHackerDJI F450 Quadcopter Drone - KK2 1 Setup, Transmitter Binding, ESC Calibration