Autonomous Drone Hardware E02: Step-by-Step PID Tuning with QGroundControl
This group of tutorials is all about autonomous drone hardware.
This time I will be demonstrating the PID tuning before a drone can be armed and taken off.
Give us a Star at https://github.com/generalized-intelligence/GAAS if you find this tutorial useful.
Видео Autonomous Drone Hardware E02: Step-by-Step PID Tuning with QGroundControl канала Nina Rong
This time I will be demonstrating the PID tuning before a drone can be armed and taken off.
Give us a Star at https://github.com/generalized-intelligence/GAAS if you find this tutorial useful.
Видео Autonomous Drone Hardware E02: Step-by-Step PID Tuning with QGroundControl канала Nina Rong
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Pixhawk 4 Setup and Calibration with QGroundControl | Pixhawk 4 + S500 Drone Build Tutorial | Part 4QGroundControl Autonomous flight - While on a mission Sky Viper lands before completionQAV500 with Pixhawk Stabilize and Rate Gain TuningPixhawk AutoTune How ToAutonomous Box Boat - Long Range Waypoint Mission - RCTESTFLIGHTOpenTx Class • Companion and Setup Basics • Learn About OpenTxStep By Step Guide | Arduplane/Chibios QGroundControl | Full Configuration & OSD | OmnibusMulticopter Tuning - Introduction to PID theory and how to tune your multirotorHOW-TO Matek F405 Wing with ArduPlane + full setup (on the X-UAV Clouds)Autonomous R/C Boat 13km Waypoint MissionHow to: Fix Oscillations | I-term Tuning[팰콘샵] 드론 제작 가이드 4-2편 - PX4 Qground Control 셋팅 방법03 Installing and using QGroundControl with ArduCopter SITLAutonomous Drone Hardware E01: Building a Drone from ScratchQGroundControl Demonstration (4/26/2020)Radiolink Mini PIX first look + newbie fumbling through Ardupilot setupPX4 Autopilot Roadmap 2019(1/8) Naze32 Flight Controller (Full version) - step by step initial setupDemonstrating my hexcopter with APM 2.6 and autonomous flightPID Tuning Made Easy