Ardupilot using an F4 board on a multicopter - part 2 (this time with a compass)

In our first attempt at flying Ardupilot on an F4 board, I mistakenly tried to do so with a plain old GPS, and quickly found that you needed a compass as well. Having fitted one (along with a 433mhz data radio) it's time to try again.

The Omnibus F4 Flight controller for this was originally supplied by Banggood, so here are a few quick (affiliate) links https://www.banggood.com/Original-Airbot-Omnibus-F4-Pro-V3-Flight-controller-SD-5V-3A-BEC-OSD-Current-Sensor-LC-Filter-p-1319177.html?p=E81211714085201408XQ&utm_source=Youtube&utm_medium=cussku&utm_content=tanghao&utm_campaign=wayne

I used the BN-880 GPS/Compass module https://www.banggood.com/UBLOX-NEO-M8N-BN-880-Flight-Control-GPS-Module-Dual-Module-Compass-p-971082.html?p=E81211714085201408XQ&utm_source=Youtube&utm_medium=cussku&utm_content=tanghao&utm_campaign=wayne

Arducopter firmware (to flash using Betaflight) https://firmware.ardupilot.org/Copter/stable-3.6.9/omnibusf4pro/

Ardupilot docs on the Omnibus F4 http://ardupilot.org/copter/docs/common-omnibusf4pro.html

Guide on setting up the OSD http://ardupilot.org/copter/docs/common-osd-overview.html

The link to the 3d printed flight controller mount I made (just in case anyone else is silly enough to do this on an old F450) https://www.thingiverse.com/thing:3704157

If you liked this video and want to show your support please feel free to join my Patreon supporters here https://www.patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it https://www.banggood.com/?p=E81211714085201408XQ

If you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/

Видео Ardupilot using an F4 board on a multicopter - part 2 (this time with a compass) канала CurryKitten