I Made a BIG Furnace to Melt Metals
Propane furnace made with scrap steel, glass and ceramic wool and refractory cement.
I wanted to reline the coal furnace i made five years back to melt aluminum but the structure was in very bad shape as it has been outside to the elements since I made it. So instead I made a new one that runs on propane with two venturi burners I made recently: https://youtu.be/9ACOr0x_Bew
This has been very long project to make but definetly worth the time as now melting aluminum is much easier and also cheaper.
The furnace holds a 230mm tall crucible of 180mm in diameter, it should hold 35kg of aluminum.
Insulation from the inside out is composed of: refractory cement, ceramic wool, glass wool.
On the bottom center I inserted a refractory brick to have someting very solid to place the crucible on.
The lid is made just of recfractory cement, it's 58cm in diameter and 5cm thick, so it weights 20kg.
0:00 Frame
2:16 Insulation
6:02 Lid hinge
7:09 Lid
9:31 Assembly
10:55 Test
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
https://www.patreon.com/blackbeardprojects
★Website★
http://blackbeardproject.com/
★Follow me★
Facebook ► https://www.facebook.com/BlackBeardProjects/
Twitter ► https://twitter.com/BlackBeardProje
Instagram ► https://www.instagram.com/black_beard_projects/
Видео I Made a BIG Furnace to Melt Metals канала Black Beard Projects
I wanted to reline the coal furnace i made five years back to melt aluminum but the structure was in very bad shape as it has been outside to the elements since I made it. So instead I made a new one that runs on propane with two venturi burners I made recently: https://youtu.be/9ACOr0x_Bew
This has been very long project to make but definetly worth the time as now melting aluminum is much easier and also cheaper.
The furnace holds a 230mm tall crucible of 180mm in diameter, it should hold 35kg of aluminum.
Insulation from the inside out is composed of: refractory cement, ceramic wool, glass wool.
On the bottom center I inserted a refractory brick to have someting very solid to place the crucible on.
The lid is made just of recfractory cement, it's 58cm in diameter and 5cm thick, so it weights 20kg.
0:00 Frame
2:16 Insulation
6:02 Lid hinge
7:09 Lid
9:31 Assembly
10:55 Test
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
https://www.patreon.com/blackbeardprojects
★Website★
http://blackbeardproject.com/
★Follow me★
Facebook ► https://www.facebook.com/BlackBeardProjects/
Twitter ► https://twitter.com/BlackBeardProje
Instagram ► https://www.instagram.com/black_beard_projects/
Видео I Made a BIG Furnace to Melt Metals канала Black Beard Projects
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Forge / Furnace Venturi Gas Burner162LB Monster Motor Melt Down - Trash To Treasure - ASMR Metal Melting - BigStackD CastingMetal Melting Furnace Last Day on Earth / Small Scale IndustrieSHow Wheelbarrows Are MadeHOW IT'S MADE | SILVER BRACELET | TUTORIALMetal Melting Furnace7 INVENTIONS THAT WILL MAKE YOUR WORK A LOST MORE USEFULPiec do topienia metali kolorowychSHREDDING & MELTING 1615 Aluminium CANS!Melting scrap brass and pouring it into shot - Metal MeltingMake a Simple Metal Foundry Using Empty Gas Cylinder.Make Free And Custom Cast Aluminum Bars For Your ProjectsBulk Key Meltdown - Big Brass Bar & Coin Casting - ASMR Metal Melting -BigStackD -Fallout UnchartedMelting Copper - Stripping Melting Mini Monster Cable - ASMR Metal Melting - BigStackD - SkullAntique Hatchet Restoration. SORT OF...Kaowool Furnace BuildDon't Build a Metal Foundry Until you See This FirstBlacksmith Rivet Tool From Scrap High Carbon SteelWhats The Exact Cost Of Gas To Melt Metals- Melting Copper & Brass