Paintless Dent Repair Using a Heat Gun and a Can of Compressed Gas Duster
Can you repair dents in an automobile with a hair dryer and a can of compressed air? Yes and no. It depends upon the location and severity of the damage. But as I have demonstrated, with a heat gun, $9 worth of Endust Duster, and about 15 minutes, you can achieve some remarkable results.
Read more at... http://blog.yagelski.com/2011/10/paintless-dent-repair-using-heat-gun.html
Responses to the most common criticisms:
Q. Why didn't you just push the dent out from behind?
A. This is a hybrid vehicle and there is A/C equipment for battery cooling that is located between the sheet metal and the interior finish. The dent was simply not accessible from the inside.
Q. Why didn't you just use a toilet plunger and pull the dent out?
A. That may have worked on the larger of the two dents, but the surface area of the smaller dent would have made that impossible.
Q. This video and photos of the dents have been Photoshopped and faked!
A. Absolutely not. I will gladly attest that this video and the images of the dent, before and after, have not been retouched. I also have a witness who observed the process and would attest the same.
Q. "Tapping" the panel like you did in the video would have popped the dent out without the heating and cooling.
A. My attempts to pop the dent out with persuasive tapping by hand and a rubber mallet prior to the heating / cooling did not have any impact.
Q. This process didn't help, you can still see the dents!
A. Yes. if you look closely you can still see the smaller of the two dents. However, the larger of the two is not distinguishable to the casual observer. This process made a significant improvement to the appearance of both dents. It is not a factory perfect repair, but this is not a valuable vehicle either. I could not justify the expense of a professional body shop for a vehicle that is seven years old and +150,000 miles. This process provided a good alternative.
Видео Paintless Dent Repair Using a Heat Gun and a Can of Compressed Gas Duster канала yagelski
Read more at... http://blog.yagelski.com/2011/10/paintless-dent-repair-using-heat-gun.html
Responses to the most common criticisms:
Q. Why didn't you just push the dent out from behind?
A. This is a hybrid vehicle and there is A/C equipment for battery cooling that is located between the sheet metal and the interior finish. The dent was simply not accessible from the inside.
Q. Why didn't you just use a toilet plunger and pull the dent out?
A. That may have worked on the larger of the two dents, but the surface area of the smaller dent would have made that impossible.
Q. This video and photos of the dents have been Photoshopped and faked!
A. Absolutely not. I will gladly attest that this video and the images of the dent, before and after, have not been retouched. I also have a witness who observed the process and would attest the same.
Q. "Tapping" the panel like you did in the video would have popped the dent out without the heating and cooling.
A. My attempts to pop the dent out with persuasive tapping by hand and a rubber mallet prior to the heating / cooling did not have any impact.
Q. This process didn't help, you can still see the dents!
A. Yes. if you look closely you can still see the smaller of the two dents. However, the larger of the two is not distinguishable to the casual observer. This process made a significant improvement to the appearance of both dents. It is not a factory perfect repair, but this is not a valuable vehicle either. I could not justify the expense of a professional body shop for a vehicle that is seven years old and +150,000 miles. This process provided a good alternative.
Видео Paintless Dent Repair Using a Heat Gun and a Can of Compressed Gas Duster канала yagelski
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Remove Car Dent Without Having to Repaint - DIYComo Sacar un Golpe con Agua Caliente | Arreglar Abolladura en el CocheDENT REMOVAL Harbor Freight Dent Puller Suction Cup ReviewRepairing Massive Dent With Only A Heat-gunYou've never seen a dent pulling tool like this! Easy Fix for door dings in minutes!FIXED in 3 STEPS! | NO Paint NO Filler!SUPER CLEAN PDR REPAIR ON A FRONT FENDER | Paintless Dent Removal Uk 🇬🇧|By Dent-RemoverDent Repair With Compressed Air? Yes and no....Car Dent Repair With Hot Water And Toilet Plunger DIY how to car denting puller car dent repairUsing Boiling Water and a Plunger to Remove Car Dents - Does it Work?Pop the dent out, just add (hot) water!How to Remove Car Dents FastExtremely Sharp Dent Repair on a Toyota Sienna Lift Gate| Dentless Touch3 Steps To Pulling Out A Dent On A CarHow to Repair Scratches on your Car | Save Hundreds of DollarsGLUE PULLING DENTS | Paintless Dent Removal UK 🇬🇧| Audi Q3 Dent RepairHow is Hail Damage Repaired with Paintless Dent RemovalAmazing Car Hacks and Tips for Fixing Dents!Como Sacar Golpes Pequeñas De Su Caro!Dent reparing with glue sticks. Best results. Must watch#dentremoving