connect Reversing back up camera on Joying android 5.1.1 lollipop car head unit radio

https://www.joyingauto.com/
Thank you rahatcuperje
let me translate this for you free of charge: the short cable with black and red wires (red-positive; red/black-GND) is needed to supply power (12V) to your reverse camera from the reversing lights (not from ANY 12V source). for peace of mind insert a 200 mA fuse just in case someone is pulling/cutting/damaging your camera power supply cable so the car fuse for the reversing lights will not blow. the long black cable is the video signal cable. you connect this one to the camera on one end and to the "rear view camera in" on the other end. now, there is a red wire running inside this video cable. IF YOU HAVE CANBUS there is no need to connect this wire to the "back" wire. CANBUS system in your car will know when you put the car in reverse and will give the proper signal to the head unit via the CANBUS decoder you should receive with the unit. if you do NOT have CANBUS connect the red wire as instructed and your rear camera will switch on only when you put the car in reverse.

Видео connect Reversing back up camera on Joying android 5.1.1 lollipop car head unit radio канала Boy ka