How to convert fluorescent tubes to LEDs using ballast bypass (Part 2)

Want to see how to convert fluorescent tubes to LEDs while bypassing the ballast? In a previous video, Harley showed a very easy but expensive way to convert fluorescent tubes to LED tubes. In this video, Harley shows a more involved, but typically less expensive, way to convert a fluorescent fixture to use LEDs involving a ballast bypass.

Ballast bypass, also called direct wired, involves removing the ballast and using LED tubes that run off of line voltage rather than the high-voltage from the ballast. Typically these bulbs are less expensive because they don’t have to deal with the higher voltage used by fluorescent tubes. This video gives instructions for how to wire the fixture to use these bulbs and provides a wiring diagram.

Convert fluorescent tubes to LEDs with the ballast (Part 1): https://www.youtube.com/watch?v=_YROz2AekkA&list=PLWmDBD9Srrwn5n-YSqq4NrRxRpRPaUBkV

Subscribe for more DIY videos: https://goo.gl/0wxKv7

Watch my most recent video: https://goo.gl/uVXA8I

For a written transcript, go to http://www.house-of-hacks.com/2017/09/how-to-convert-fluorescent-tubes-to.html

Music under Creative Commons License By Attribution 3.0.
Intro/Exit: "Hot Swing" by Kevin MacLeod at http://incompetech.com
Incidental: "Acid Trumpet" by Kevin MacLeod at http://incompetech.com

Видео How to convert fluorescent tubes to LEDs using ballast bypass (Part 2) канала House of Hacks