Register Yamaha Immobilizer Key on FZ1

Remember, you must register all the black keys, otherwise only the registered key(s) will work and the not registered ones will stop working.

Instructions:
You must have the full key set (2 black, 1 red), if you try to only code one then the other will no longer work as the immobiliser system recodes all the keys.
1. Lay all three keys on the seat next to eachother
2. Ensure the master key is working by turning ignition to ON and starting engine
3. Turn the red master key to OFF position and wait approx. 30 seconds until red key indicator light begins to flash
4. Switch red master key on and off, you do not need to wait for electrical system to finalise
5. Put first key in quick succession, turn to ON, then OFF
6. Put second key in quick succession, turn to ON, then OFF
7. Turn second key to ON position and try to start engine, if it works, remove key and try the 1st key you coded
8. If you can start the engine with both keys, then the process is complete.

Видео Register Yamaha Immobilizer Key on FZ1 канала BxxyyDxxyy