AeroSky ZMR250 Carbon Fiber Mini Quadcopter CC3D

ZMR250 Carbon Fiber: http://www.xheli.com/05h303-6024-qav250-3-rtf-24g-carbon.html
Superlight Plastic Quadcopter 250: http://www.xheli.com/05h301-6052-qav250-1-rtf-24g-plastic.html

Below is the link for Open Pilot. Please note that the quad is already set up out of the box, if you change the settings and the quad no longer flies correctly we are not liable for your mistake.
https://wiki.openpilot.org/display/WIKI/OpenPilot+User+Manual
Mini quads have become the latest must have item of the quadcopter world. The frame is made of carbon fiber so it’s extremely light and durable. Because of the light frame this quadcopter is extremely fast and agile. The battery strap is integrated into the top plate so it will keep it secure for high G maneuvering. The quadcopter will come with an insulated plate to mount your favorite miniature camera to the front of the unit. The ready to fly version comes with everything you need. It is pre-programmed. Install the propellers and you’re ready to fly this awesome machine.

The quadcopter is controlled by the CC3D flight controller. This exceptional flight controller was developed by the OpenPilot community. This CC3D was produced in close collaboration with OpenPilot and is manufactured with the best components and at a reputable, commercial grade 'pick and place' facility. The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes. The Ground Control Software ("GCS") provides an easy way to program the board via a USB connection (USB cable not included).
CC3D Hardware Features

Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM
3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer
Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
Software support for Windows, Mac and Linux
Direct high speed USB support with no drivers required, a truly plug and play device.
Spektrum satellite receiver support
Futaba S-BUS hardware support
Innovative Flexi-port technology for superior port flexibility
4Mbits on-board EEPROM for configuration storage
Flexiport
CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs.
Sensors and Components

3-axis Gyroscope array and 3-axis Accelerometer: MPU-6000
Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers
Simultaneous support for multiple receivers
ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)
10 PWM outputs to servos or ESC’s, or for camera stabilization
Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers
Onboard USB connectivity for easy configuration
USB and serial telemetry and configuration (including wireless with optional radio modules)
Supported by powerful OpenPilot GCS
4 Mbit onboard memory
3C Quaternion based complementary filter running at 500Hz

Видео AeroSky ZMR250 Carbon Fiber Mini Quadcopter CC3D канала Xheli RC Drone Helicopter