How to make a 1/8 scale AMX-13 - step by step
The AMX-13 is a French light tank developed during the early 1950. It has an oscillating turret, which means that the whole upper part elevates. The canon is a 75mm auto-loader, fed by two revolver magazine in the back of the turret. The design was revolutionary when it arrived.
This is a pretty long step-by-step description of how I made my AMX-13, a remote controlled tank in 1/8 scale.
- 2 x 15Nm, 12V screw driver as motors
- 2 x 80A ESC from Hobbywing
- Hull made of plywood and aluminium
- Springs as shocks
- 3D printed tracks, drive wheels, road wheels and idler wheel
- 3D-printed details, such as the canon, vents, lights, etc
By using existing parts, cheap material like plywood, ordinary nuts and bolt, and a 3D-printer, I would like to show that you can accomplish stuff without spending a lot of money, or having the fanciest tools in your workshop. Enjoy! :)
Видео How to make a 1/8 scale AMX-13 - step by step канала builtbyWikander
This is a pretty long step-by-step description of how I made my AMX-13, a remote controlled tank in 1/8 scale.
- 2 x 15Nm, 12V screw driver as motors
- 2 x 80A ESC from Hobbywing
- Hull made of plywood and aluminium
- Springs as shocks
- 3D printed tracks, drive wheels, road wheels and idler wheel
- 3D-printed details, such as the canon, vents, lights, etc
By using existing parts, cheap material like plywood, ordinary nuts and bolt, and a 3D-printer, I would like to show that you can accomplish stuff without spending a lot of money, or having the fanciest tools in your workshop. Enjoy! :)
Видео How to make a 1/8 scale AMX-13 - step by step канала builtbyWikander
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to make a 1/6 scale Strv M/39 - step by stepRC tanks tearing up the course!1/6th Scale German Half track Sd Kfz 250 complete build.Giant 1:4 Scale Leopard 2 A7 VFully 3D Printed TANK - Brushless Gear DriveInside The Tanks: The AMX 13: Part I - World of TanksHow to build a homemade rc tank3D PRINTED RC MINI TANKHeng Long XLusive series 1:8 Tiger 1. Finally ReadyTrumpeter 1/35 BR 52Tamiya 1/35 German Sdkfz 251 / 9 Half Track, Full Build Part 1AMX 13TOO Dangerous for kids - RC TANK with working GUN Heng Long 1/16 3839-13D printed RC car final assembly and first test-driveHow to make a 1/6 scale Steyr RSO - step by stepBuilding the Tamiya 1/35 AMX 13 French light tank easy step by step instructionsHuge tanks and trains!3D tištěný velký RC tank King Tiger II - v měřítku 1:5,5 - No1 - Začínáme!My First Diorama Has 3D Printed Parts In It (Not Really a Diorama, But Still) | T-90 | Revell 1/72Recycle your failed 3D prints! Make new filament at home.