CARBON COAT, Next Level Rust Protection

Carbon Coat Next Level Rust Protection
Check out Carbon Method and get the best protection for your tools: https://carbonmethod.com/

My last comment I asked Dan, the founder/Owner of Carbon Method, how often should I apply the Carbon Glide. His answer: After the 4 carbon coat he suggested, You want to let the coating cure for a minimum of 24 hours before applying glide. If you can let it sit for a few days that would be even better. The coating takes a few weeks until it reaches its full hardness. Start with one coat of glide to see how you like it. Carbon Glide is crazy slick. Then you just reapply once you feel a noticeable reduction in slickness. It's really as needed and depends not so much on time but the number of cuts on the saw or tool.

Below is the break down of the video, If you want to fast forward to the application process;
The Carbon Method: 3:00
Preparation suggested tips: 4:35
Break down of Carbon Coat Method: 8:05
Cleaning Preparation: 9:45
Application demo: 13:05
A few insights and reply from Dan the owner/Founder: 22:25
Completion of 1st coat of Carbon Coat: 27:10
Final application: 27:40
Out Come, See what the table top looks like: 30:45
Final thoughts:32:16
Carbon Glide How to use: 35:55
My family emergency: 37:55

Check out my amazon store and help support this channel. Click on the link below:
https://www.amazon.com/shop/theshack

Thank You for viewing, Subscribe and Like

Follow me on twitter: rick@backintheshack

Check out My Channel: http://www.youtube.com/c/TheShackHome

Видео CARBON COAT, Next Level Rust Protection канала The Shack