OpenWRT - Configure Multiwan Failover with mwan3
In this video, we are going to configure dual WAN in failover mode with mwan3 on OpenWRT Luci. All the traffic is routed to the primary WAN interface. When it is down, either physically or the internet connection is down, the traffic will be directed to the secondary WAN interface.
There are 2 required packages:
mwan3 - the core package for load balancing
luci-app-mwan3 - the package that enables configuration from Luci web interface
Video timeframe:
00:00 - Introduction and network topology
01:40 - OpenWRT switch configuration for dual WAN
02:30 - OpenWRT network interfaces overview
03:50 - Packages for multiwan configuration
04:00 - Mwan3 multiwan failover configuration
11:06 - Multiwan failover mode verification & test method
15:40 - Final words
Check out other useful tutorial:
- Configure Load Balancing with mwan3: https://www.youtube.com/watch?v=f_yGMezdMB0
- Configure LAN port as a WAN port: https://www.youtube.com/watch?v=FgMnPE3CYo4
- mwan3 full guide: https://openwrt.org/docs/guide-user/network/wan/multiwan/mwan3
As always, if you have any question or idea, feel free to leave it in the comment. If the video is helpful, please like, share and subcribe to support me! Thank you!
Видео OpenWRT - Configure Multiwan Failover with mwan3 канала Van Tech Corner
There are 2 required packages:
mwan3 - the core package for load balancing
luci-app-mwan3 - the package that enables configuration from Luci web interface
Video timeframe:
00:00 - Introduction and network topology
01:40 - OpenWRT switch configuration for dual WAN
02:30 - OpenWRT network interfaces overview
03:50 - Packages for multiwan configuration
04:00 - Mwan3 multiwan failover configuration
11:06 - Multiwan failover mode verification & test method
15:40 - Final words
Check out other useful tutorial:
- Configure Load Balancing with mwan3: https://www.youtube.com/watch?v=f_yGMezdMB0
- Configure LAN port as a WAN port: https://www.youtube.com/watch?v=FgMnPE3CYo4
- mwan3 full guide: https://openwrt.org/docs/guide-user/network/wan/multiwan/mwan3
As always, if you have any question or idea, feel free to leave it in the comment. If the video is helpful, please like, share and subcribe to support me! Thank you!
Видео OpenWRT - Configure Multiwan Failover with mwan3 канала Van Tech Corner
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
OpenWRT for beginners - Full basic configuration video tutorialOpenWRT - Configure Load Balancing with mwan3Разбираемся с QoS на примере роутера Asus AC68UOpenWRT - HAP AC2 Throughput Test - WAN to LAN, WiFi, OpenVPN & WireguardOpenWRT x86 PC - Install & Setup Ethernet Network Adapter - Intel Quad Port Server AdapterGOCLOUD/NEWIFI3 D2 2021 WITH ANTI-LAG VLAN / FOR HOME USE / USB TO LANOpenWRT - Setup Guest WiFiOpenWRT - Configure LAN port as WAN portcheap DIY NAS from old Router with OpenWrt and Samba for your home networkHow to configure OpenWrt as Firewall for your home network and Guest Wifi and IPTables explainedOpenWRT - DDNS Client - Dynamic DNS with NoIP & NamecheapCombine Multiple Internet Broadband Connections Into One Using OpenWrt On Your Existing RouterBalanceo de carga con OpenWRT (MWAN3)pfSense Dual Wan Failover setup guide for redundant WAN connections.CHEAP WI-FI MESH ALTERNATIVE with fast roaming OpenWrt Wi-Fi Access pointsOpenWRT - x86 PC Installation - Live USBOpenWRT - USB TetheringOpenWRT - Captive Portal - WiFi Splash PageOpenWRT - SQM QoS Setup on LuCIMikroTik DUAL WAN Load Balancing with Failover using ECMP