How to: Remove intake manifold Ford Duratec HE (Mondeo, Focus) / Mazda LF
DIY: Remove and replace the inlet manifold on a Ford Duratec HE or Mazda LF engine in a Mondeo Mk3, Focus Mk2, or some Mazdas and Volvos. Early Duratecs in the Mondeo particularly had swirl flaps that wore too easily and could destroy the engine. You also need to remove the manifold to access the PCV valve & hose, plus the knock sensor.
It's also good practice to drain the oil that accumulates inside and give the interior a bit of a clean.
Video on the swirl flaps: https://youtu.be/amRXA22ofds
Video on the PCV valve and hose: https://youtu.be/-TR4pZdXZpg
If you need to replace the manifold gaskets, the part # (individual, you need four) is F1119284....
Amazon US: http://amzn.to/2bV8sLi | UK: http://amzn.to/2cpztel
... and the EGR inlet seal # is F1119833.
You will need:
- Jack and axle stands, or other way to get under car front
- Screwdriver blade or similar to release air intake clip, and long nose pliers to redo
- Socket set or spanners
- 10 mm socket with 1/4" or 3/8" wrench and (important) variable length extension bar(s) as shown
- Blu-Tack or other way of grabbing bolts (e.g. magnetic socket head)
- Masking tape
- Small mirror
- Flashlight
- Ideally: Torque wrench for 18 nm manifold bolts
- Brake clean
- Rag(s).
(Using the above Amazon links helps support my channel and is appreciated!)
Видео How to: Remove intake manifold Ford Duratec HE (Mondeo, Focus) / Mazda LF канала Craig's DIY Car
It's also good practice to drain the oil that accumulates inside and give the interior a bit of a clean.
Video on the swirl flaps: https://youtu.be/amRXA22ofds
Video on the PCV valve and hose: https://youtu.be/-TR4pZdXZpg
If you need to replace the manifold gaskets, the part # (individual, you need four) is F1119284....
Amazon US: http://amzn.to/2bV8sLi | UK: http://amzn.to/2cpztel
... and the EGR inlet seal # is F1119833.
You will need:
- Jack and axle stands, or other way to get under car front
- Screwdriver blade or similar to release air intake clip, and long nose pliers to redo
- Socket set or spanners
- 10 mm socket with 1/4" or 3/8" wrench and (important) variable length extension bar(s) as shown
- Blu-Tack or other way of grabbing bolts (e.g. magnetic socket head)
- Masking tape
- Small mirror
- Flashlight
- Ideally: Torque wrench for 18 nm manifold bolts
- Brake clean
- Rag(s).
(Using the above Amazon links helps support my channel and is appreciated!)
Видео How to: Remove intake manifold Ford Duratec HE (Mondeo, Focus) / Mazda LF канала Craig's DIY Car
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to: Fix swirl flaps & save your engine (Ford Duratec HE, Mondeo/Focus/et al)How To Replace Intake Manifold Gaskets 02-07 Mazda 6How to: Replace PCV valve, hose, oil separator Ford Duratec / Mazda L (Focus/Ranger/Mondeo/Mazda)Como cambiar la manguera de la válvula pcv de ford focus parte 2How to: Clean & replace T-MAP sensor Ford Duratec / Mazda L (Mondeo, Focus, Ranger, Mazda)Timing Chain, Ford Mondeo Mk3 2L Duratec2012 Ford Focus Intake Valve Cleaning due to Direct InjectionEngine Knocking or Ticking?!? This Could Be Your "FIX" Ford/Mazda/Bmw/Honda/ToyotaVířivé klapky | Kurvítko! | Ford Mondeo mk3 1.8p2004 fix 2004 ford focus intake manifold runner control stuck open03-11 Ford Focus 2.0L PCV Breather Hose Replacement Overview - 2.3L also?Inlet Manifold Removal : How To Step By Step Guide - Ford Focus DuratecInlet Manifold SwirlFlaps, Breather Hose & p.a.s Pump Removal...Duratec he, Ford Mondeo Mk3How to: Remove alternator, Ford Duratec / Mazda L (Mondeo, Focus, Escape, Mazda, Volvo)How to Clean an Intake Manifold Inside & Out (Remove Carbon Buildup)How to remove intake manifold’s eight hidden bolts on 2009-2012 2.0 engine MAZDA 32.0 ТДВС: "Ford Focus 2" Доработка двигателя Duratec HE 1,8. Шаг 1 (выпуск, EGR). Тест.2.0HDi 2.0TDCi 2.0D EGR valve cleaningHow to: Clean & replace throttle body Ford Duratec HE (Mondeo, Focus, Mazda)