FPV Tutorial: Setting up the MicroMinimOSD as a standalone OSD (no flight controller)

The MicroMinimOSD is a super cheap little device that works great in a Mini quad with a Naze-style flight controller, but is just as useful as a standalone OSD.

In part 1 of this video we'll look at exactly how you configure/flash the device to act as a simple voltage display/timer and then in part 2 we'll add in a GPS receiver to make a more fully featured OSD.

You can get some of the stuff I was using here (affiliate links use)

The MicroMinimOSD -
http://www.banggood.com/MICRO-MinimOSD-Minim-OSD-Mini-OSD-W-KV-Team-MOD-For-Naze32-Flight-Controller-p-990556.html?p=E81211714085201408XQ

A suitable FTDI adapter -
http://www.banggood.com/FTDI-USB-OSD-Programmer-Module-for-F3-Flight-Control-AIO-Transmitter-OSD-BEC-Current-Sensor-p-1111287.html?p=E81211714085201408XQ

If you want to get yourself a GPS ready for the next video, I'm using this one -
http://www.banggood.com/GPS-Module-with-Ceramic-Antenna-GPS-Receiver-TTL9600-Ublox-Module-for-Multirotor-p-1100984.html?p=E81211714085201408XQ

An XT60 connector with attached jst leads -
http://www.banggood.com/Connector-Plug-JST-Male-Female-Wire-For-RC-Li-po-Battery-p-1049134.html?p=E81211714085201408XQ

If you are wondering what the little portable video receiver I used is, it's this one -
http://www.banggood.com/GTeng-FPV-T909-5_8G-3dBi-32CH-Receiver-2_6-Inch-Screen-Real-time-Wearable-Watch-w-350mAh-Lipo-p-1051438.html?p=E81211714085201408XQ

If you liked this video and want to show your support - either through subscribing, using an affiliate link, becoming a Patreon supporter or buying a T-shirt, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/

Видео FPV Tutorial: Setting up the MicroMinimOSD as a standalone OSD (no flight controller) канала CurryKitten