Transmitter doesn't work
Defective AOMWAY 5.8 1000 mW
The antenna was all the time tied and I hadn't taken it off. After that everything was OK. There was a high-quality picture through the receiver on TV, but there was also a smell of burning from the transmitter. Next day I turned on it to try the video signal at a distance. The transmitter had worked for 15-20 seconds and then turned off, the picture on monitor disappeared and the LED of operation indication went out. At the same time there was a burning smell again and the transmitter became very hot.
Now the transmitter works for 15-20 seconds, becomes very hot and turns off, though the ventilator is OK.
Add 13/03/2015:
By the first turning on my power amplifier SE5004L burnt out ($1.5 for 1 piece). It is under the cover with a ventilator, not far from the connector SMA. It’s impossible to solder the power amplifier by yourself, that’s why I brought it to a mobile phone repair shop. They solder it for $10. Now it is OK.
----
У меня при первом включении сгорел усилитель SE5004L ($1.5 за 1 штуку). Находится под крышкой с вентилятором недалеко от разъема SMA. Самому перепаять усилитель практически невозможно, поэтому я отдал его в мастерскую по ремонту мобильных телефонов и за 500 рублей и 20 минут времени его перепаяли. Сейчас всё работет.
Видео Transmitter doesn't work канала KudinovIgor
The antenna was all the time tied and I hadn't taken it off. After that everything was OK. There was a high-quality picture through the receiver on TV, but there was also a smell of burning from the transmitter. Next day I turned on it to try the video signal at a distance. The transmitter had worked for 15-20 seconds and then turned off, the picture on monitor disappeared and the LED of operation indication went out. At the same time there was a burning smell again and the transmitter became very hot.
Now the transmitter works for 15-20 seconds, becomes very hot and turns off, though the ventilator is OK.
Add 13/03/2015:
By the first turning on my power amplifier SE5004L burnt out ($1.5 for 1 piece). It is under the cover with a ventilator, not far from the connector SMA. It’s impossible to solder the power amplifier by yourself, that’s why I brought it to a mobile phone repair shop. They solder it for $10. Now it is OK.
----
У меня при первом включении сгорел усилитель SE5004L ($1.5 за 1 штуку). Находится под крышкой с вентилятором недалеко от разъема SMA. Самому перепаять усилитель практически невозможно, поэтому я отдал его в мастерскую по ремонту мобильных телефонов и за 500 рублей и 20 минут времени его перепаяли. Сейчас всё работет.
Видео Transmitter doesn't work канала KudinovIgor
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Распознавание дорожных знаковПервый полёт около Луковского лесаСравнение фонарей уличного освещенияРабота нового двигателя на ХХЛивень в Рязани (TimeLapse)ПешеходПешеход - самоубийцаМакет видеопанорамы из 5 камер и тепловизораMVI 0634Технология формирования разноспектрального панорамного видеоизображенияГранд макет