ArduCopter Battery Voltage & Current Monitor Calibration
How to calibrate the voltage and current read by a monitor attached to an APM, PX4 or Pixhawk
Видео ArduCopter Battery Voltage & Current Monitor Calibration канала Randy Mackay
Видео ArduCopter Battery Voltage & Current Monitor Calibration канала Randy Mackay
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
FPV Part 5: 3DR APM 2.6 Setup for Power Module and MinimOSD Battery Voltage.
Pixhawk 4 Setup and Calibration with QGroundControl | Pixhawk 4 + S500 Drone Build Tutorial | Part 4![Flysky fsi6 3-mode switch setup | Flight Modes setup in mission planner [Altitude hold,RTL,flip]](https://i.ytimg.com/vi/wezRWqgSyb4/default.jpg)
Flysky fsi6 3-mode switch setup | Flight Modes setup in mission planner [Altitude hold,RTL,flip]
MissionPlanner Intro_03 : How to set Fail Safe and Battery Monitoring
'Shake to Wake' Autolaunch Setup
APM (FC) - Auto Take Off (Lepas Landas Otomatis)
Pixhawk APM voltage and current meter
Arducopter first try (circle, spline, mission, RTL etc)
(3/8) APM 2.5/2.6/3.1 - Troubleshooting APM arming
DIY drone (Part Two) | S500 | Pixhawk | FPV Quadcopter |
pixhawk battery monitor setup
Mauch Power Module Installation and Setup
APM/Pixhawk Tips for Good Loitering
MINDS i Mission Planner Step #10B Battery Failsafe
Connecting Raspberry Pi w/ Pixhawk and Communicating via MAVLink Protocol
Ardupilot Flight Modes, Failsafe, Telemetry Radio Setup APM mission Planner - XUAV Mini Talon Part 7
Parameter Setup & Calibrations - Arduplane With Pixhawk 2.1 CUBE - Mission Planner
MIssion Planner Secrets and Hidden Features
How Make drone Using Apm 2.8 Flightcontroller for Quadcopter Explain in hindi /Urdu
Flysky Fs-i6x Mission Planner Flight Modes setup