Загрузка страницы

How to remove IHS from PS3 CELL CPU and RSX GPU

Used to remove CELL IHS - Feeler gauge purchased on ebay. Rounded off edges and sanded down the end using dremel very thin to get under IHS

Used to remove RSX IHS - Heatgun set to 1050 degrees farenheit for about 30-45 seconds. Don't recommend over 60 seconds. Then used a thin butter knife to pop it off with a clip from a business card under the knife to protect the BGA. Then used a razor to clean the RAM blocks on the RSX and same for both IHS. But on the CELL to clean off the residue i recommend a small ended blade like the one in the video otherwise you can scratch it. The RAM blocks can also very cleaned be finished using sand paper.

I personally choose not to use glue when putting back the IHS, simply because in case you need to rework again its not a pain to remove and so there isnt more stress on BGA. Also because when put back together carefully it doesnt move.

I also make sure to use a board support when doing this

I do not take credit for this though, through forums and threads ive found many great people sharing their knowledge, im simply making an easy video to help others.

Видео How to remove IHS from PS3 CELL CPU and RSX GPU канала AllTech Repairs
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
25 июля 2013 г. 1:29:26
00:06:29
Яндекс.Метрика