S500 Quadcopter APM HKPilot 2.7 Locked in with Loiter Altitude Hold and RTL
After testing with the KK2.1 I have installed the APM 2.7 from Hobbyking. Working very nicely considering the windy conditions. Using my Basic Turnigy 9x with the 4 flight modes as a test of both the Quadcopter and the Controller
S500 Quadcopter Frame
HKPilot 2.7 (APM Arducopter 3.2)
Turnigy NEO 6M GPS
AFRO 30A ESC
Turnigy 1400kV 2826 Motors
Turnigy 3s 3000kV Lipo
Flight time approx 8 mins
PID settings at the end of the Video
Видео S500 Quadcopter APM HKPilot 2.7 Locked in with Loiter Altitude Hold and RTL канала Simon Hahnel
S500 Quadcopter Frame
HKPilot 2.7 (APM Arducopter 3.2)
Turnigy NEO 6M GPS
AFRO 30A ESC
Turnigy 1400kV 2826 Motors
Turnigy 3s 3000kV Lipo
Flight time approx 8 mins
PID settings at the end of the Video
Видео S500 Quadcopter APM HKPilot 2.7 Locked in with Loiter Altitude Hold and RTL канала Simon Hahnel
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
ArduCopter V3 RC4 - Two little issue affecting Loiter and Alt HoldFlysky fsi6 3-mode switch setup | Flight Modes setup in mission planner [Altitude hold,RTL,flip]OpenPilot CC3D Multiple Flight Modes and In-Air Gain Tuning with FrSky TaranisCC3D & Altitude Hold controller module (ATmega128)Australian High Country Cabin / Shack Build - Solar system Overview and a new Digger for the FarmAPM 2.5 Flight modes Stabilise, Altitude hold and Loiter - Tabrez NadviOFM S500 Super Quadcopter Review with Maiden FlightRobocat cc3d revo gps altitude vario first trialPixHawk/Mission Planner/ArduCopter Build for Beginners: Maiden Flight!Australian High Country Cabin / Shack Build - Start the Sub Floor and Set the Veranda PostsApm 2.8 drone crash problem solveBuilding a raised garden bed for herbs and spices by the outdoor kitchen with recycled materialsAustralian High Country Cabin / Shack Build - Raise the Main Roof beam and frame the deck joists.Australian High Country Cabin / Shack Build - Install the Windows and DoorsHow to make Drone at home using Pixhawk Flight Controller - F450 #Quadcopter Drone | Pixhawk DroneAustralian High Country Cabin / Shack Build - Creating a Laminated Main Roof BeamArducopter APM 2.6 ALT_HOLD Problem FIXFish Pond Build - Start to Finish - With Wetland Bio FilterAustralian High Country Cabin / Shack Build - Start to Finish - Time LapseInstall the Firestone PondGard EPDM Pond Liner and underlay from Rock around the Block - Frog Pond