DJI FPV Drone - TEARDOWN & OVERVIEW

This is the DJI FPV Drone from DJI.
As always I opened it up to see what makes it tick.
The main questions are: How sturdy the design is and how easy would be for an average person to repair it.
As a piece of advice for all the guys just starting out their FPV journey with this drone is to stay out of the M flying mode (fully manual to be exact) until they fully learned the skill to fly it in a simulator and even then to pay extra caution when flying in M mode. The (acro, manual, rate mode, etc) style of control takes months or even years to master so be careful and don't make any stupid decisions!

Tools that I use:
Hot Air Station: https://www.banggood.com/custlink/KDGm7y06dd
Microscope: https://www.banggood.com/custlink/mGm3MtaJV3
Microscope camera: https://www.banggood.com/custlink/m3vEEKBauo
Camera adapter: https://www.banggood.com/custlink/K333kPa44b
PCB holder: https://www.banggood.com/custlink/Gm3KktUahw
RIDEN Power Supply Module: https://ban.ggood.vip/V4Om
Soldering Iron: https://www.banggood.com/custlink/mmGK2P2oKP
Soldering Tips: https://www.banggood.com/custlink/vGmKMtqjGO
Tweezers: https://www.banggood.com/custlink/mGvvqtMLm7
Solder: Loctite 60/40 0.5mm
Solder wick: https://www.banggood.com/custlink/K33mqFMOEn
Flux: https://www.banggood.com/custlink/mGGDkHUjYp
Thermal Camera: https://ban.ggood.vip/VuTR
Oscilloscope: https://ban.ggood.vip/Wcbz
Electronic load: https://ban.ggood.vip/WhHv
Multimeter: https://ban.ggood.vip/X1ZC

My Patreon: https://www.patreon.com/LivyuFPV

Thank you!

Chapters:
0:00 Intro
3:50 Battery
4:45 Canopy
7:05 Gimbal
9:12 Metal Cap & Ramblings
11:53 ESC
17:00 Landing gear, Antenna, Motor
18:20 Conclusion

#DjiFPV #DjiDRONE #Teardown

Видео DJI FPV Drone - TEARDOWN & OVERVIEW канала Livyu FPV