Using The Momentary Switch To Arm Your Model with OpenTX

On the iNav Fixed Wing Group, a question was aske on how to use the momentary switch as an arm switch. So here's how to do it. Its pretty simple and can work with both traditional receiver only models and models with flight controllers.

If you are using this with a standard receiver, I highly recommend that you only use this to create a switch. You should also use something like my Ultimate Arm Switch do add checks to make sure the throttle is low https://youtu.be/62mxq76fOyk

Contents
00:00 Introduction
00:43 Creating the switch logic
02:55 Adding voice feedback
04:22 Setting up the arming action for a regular receiver
05:51 Setting up the arming input for a flight controller
07:29 Making this arming method safe for the FrSky failsafe bug
08:34 Sending the switch to the flight controller
09:30 Conclusion

Example OpenTX model https://www.mrd-rc.com/go/momentary-switch-for-arm-and-disarm/

In this video
FrSky Horus X10S Express https://bit.ly/MrD_3l7b8K5

If you found the video useful, I'd appreciate a thumbs up. This will help YouTube share this video with other RC pilots who may find it helpful. If you would like to get more videos when they become available, please subscribe and click the notifications bell icon. If there are links above, they may be affiliate links. If you click them, it will help me and my channel at no additional cost to you.

There are more tutorials on my web site at https://www.MrD-RC.com. You can also join like-minded people at the Fixed Wing RC Rebels group on Facebook. Also, if you found my videos useful, and would like to leave me a little tip, you could always buy me a Coffee at https://www.mrd-rc.com/go/ko-fi/

Thank you for your time, and don't forget to fly it like you stole it!

Видео Using The Momentary Switch To Arm Your Model with OpenTX канала Mr.D - Falling with style