Headquake's RC - #204 (67 Scout Full Build Video) may2015

Here's another full classic truck body build video. This time its a 1967 International Harvester Scout 800. 50 hours of work edited down to a peppy 19 minutes, including "1st ride" footage at end. May 2015. *Build notes below.

Materials used:
-3/4" pine board,
-1/4" masonite (press board)
-3mm Komacel (pvc sheet)
-1mm styrene sheet
-clear plastic from blister packs and juice bottle
-2mm thick wire
-aluminum L channel
-Carpenter's wood glue
-thick CA glue
-shoegoo
-wood filler
-green putty
-white acrylic wood primer paint
-various coloured acrylic craft paints
-Flat black acrylic wood paint used thick or thinned with water for "wash" paint.

Tools used:
-Hand saw
-drill
-jigsaw
-sharp boxcutter
-Dremel rotary tool with 60 grit carving wheel
-sandpaper holders with 60 and 120 grit paper
-various clamps
-steel rular
-lighter
-scribing tools
-leather hole punch
-pliers, scissors and screwdrivers
-couple wore out paintbrushes

Chassis:
-GCM 4ten chassis, front trans mount and transfer case.
-RC4WD k44 axles, wheels and Mudcountry tires.
-Axial trans
-Tamiya long leafsprings
-Tekin FXR esc and 45t brushed motor
-spektrum radio

Cameras:
-Canon 60d
-Gopro hero3

See the Build thread at the ScaleBuildersGuild forum.
http://scalebuildersguild.com/forum/showthread.php?23694-1967-IH-Scout-800

Headquake facebook page.
https://www.facebook.com/headquakeRC?ref=bookmarks

Видео Headquake's RC - #204 (67 Scout Full Build Video) may2015 канала Headquake137