[DIY]Automatic Motion Controlled Switch using NodeMCU, Relay and PIR Sensor(Blynk App, Aruidno IDE)
Make your own motion controlled switch with NodeMCU, Relay and PIR Sensor and control them using the Blynk app on your mobile phone! The use of Blynk app is not much in this video but you can modify certain things and make use of the app. It can useful if you plan to add more sensors and automate your home (or atleast your room) at a much higher level!
Devices used in the video:
NodeMCU: http://s.aliexpress.com/BzIZvYrM
4-Channel Relay Module: http://s.aliexpress.com/3miqMNZF
PIR Motion Sensor: http://s.aliexpress.com/fQ3aq6vA
Female-to-Female Jumper Cables (F-F): http://s.aliexpress.com/VBJ7fYjM
Arduino Code for NodeMCU:
https://drive.google.com/file/d/1AKg_rXGYbZi4BWHVcroNjj8xl7WfSoKk/view?usp=sharing
NodeMCU Driver:
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
Connect on
*NEW* Telegram group for discussion: t.me/hackersrijan
Facebook page: @hackersrijan
Twitter: @srijansaxena
Telegram: @srijansaxena
Thanks for watching...
Like, Share and Subscribe
Music provided by Frequency, FreeSongsToUse
Track: John Alexander - Saxophone
Link: https://www.youtube.com/watch?v=78n6a1N74Ms
Видео [DIY]Automatic Motion Controlled Switch using NodeMCU, Relay and PIR Sensor(Blynk App, Aruidno IDE) канала Hacker Srijan
Devices used in the video:
NodeMCU: http://s.aliexpress.com/BzIZvYrM
4-Channel Relay Module: http://s.aliexpress.com/3miqMNZF
PIR Motion Sensor: http://s.aliexpress.com/fQ3aq6vA
Female-to-Female Jumper Cables (F-F): http://s.aliexpress.com/VBJ7fYjM
Arduino Code for NodeMCU:
https://drive.google.com/file/d/1AKg_rXGYbZi4BWHVcroNjj8xl7WfSoKk/view?usp=sharing
NodeMCU Driver:
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
Connect on
*NEW* Telegram group for discussion: t.me/hackersrijan
Facebook page: @hackersrijan
Twitter: @srijansaxena
Telegram: @srijansaxena
Thanks for watching...
Like, Share and Subscribe
Music provided by Frequency, FreeSongsToUse
Track: John Alexander - Saxophone
Link: https://www.youtube.com/watch?v=78n6a1N74Ms
Видео [DIY]Automatic Motion Controlled Switch using NodeMCU, Relay and PIR Sensor(Blynk App, Aruidno IDE) канала Hacker Srijan
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Home Automation using NodeMCU and Google Assistant | Voice Activated | Blynk, IFTTT, Arduino IDEDIY Smart Switch - Part 1 how to use a relayHow to do Simple Home Automation with Amazon Alexa || ESP8266ESP32 with PIR Motion Sensor using Interrupts and TimersBlynk ESP8266 DHT11 Temperature SensorControlling Lights from Internet NODE MCU ESP8266 IOTTasmota + D1mini (or Sonoff) - Temp & Humidity, ws2812 LEDs, and Motion DetectionHow PIR Sensor Works and How To Use It with ArduinoHow To Make Motion Sensor Light HomemadeInternet Connected Motion Sensor | ESP8266 01 + PIRHow to add WiFi Control to any project || ESP32 Beginner's GuideHome automation using node mcu & blynk (IOT)WiFi Home Door Lock| Blynk | iot project # 4ESP8266 PIR motion sensor & Adafruit IO - IFTTT - Tutorial Nodemcu Arduino[HINDI] Control Your Room Lights With Your Mobile | Make Your Home "Smart" | Arduino Uno FULL SetupEasy DIY Home Automation over Internet (Blynk, NodeMCU, Relay)ULTRASONIC VS PYROELECTRIC/PIR HUMAN DETECTION - automatic light switch how toESP8266 WiFi Control with Android App.Connect PIR sensor to NodeMCU using 3.3V (HC-SR501)DIY WiFi RGB LED Lamp || ESP8266 & Blynk