#1 Mini How to bind FlySky FS-A8S micro receiver to the FlySky FS-i6 transmitter
How-to bind FlySky FS-A8S to Flysky FS-i6 transmitter.
Once Transmitter is powered for the first time its LED blinking slowly. It means either it is not bound or transmitter is off or receiver is in failsafe – signal lost.
1. First step is to power your receiver while holding the BIND button. You will notice the receiver LED is blinking fast.
2. Next power the Transmitter in BINDING mode. LED start to blink slowly. This is tricky part as slowly blinking LED also means no signal or signal lost, it appears that it also means BINDING complete.
3. Finally just turn your transmitter OFF an ON and voila! Solid LED means you have successfully bound your micro receiver!
FlySky FS-A8S micro receiver was provided by Banggood for review purposes. You can find this micro receiver here: https://goo.gl/064Byt
Видео #1 Mini How to bind FlySky FS-A8S micro receiver to the FlySky FS-i6 transmitter канала Montis
Once Transmitter is powered for the first time its LED blinking slowly. It means either it is not bound or transmitter is off or receiver is in failsafe – signal lost.
1. First step is to power your receiver while holding the BIND button. You will notice the receiver LED is blinking fast.
2. Next power the Transmitter in BINDING mode. LED start to blink slowly. This is tricky part as slowly blinking LED also means no signal or signal lost, it appears that it also means BINDING complete.
3. Finally just turn your transmitter OFF an ON and voila! Solid LED means you have successfully bound your micro receiver!
FlySky FS-A8S micro receiver was provided by Banggood for review purposes. You can find this micro receiver here: https://goo.gl/064Byt
Видео #1 Mini How to bind FlySky FS-A8S micro receiver to the FlySky FS-i6 transmitter канала Montis
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
FS-A8S: Wiring & Betaflight Set Up (Ibus/PPM)FlySky micro receivers ground level range testHow to Bind a FlySky i6 to a DasMikro receiverJumper T-lite flysky protocol set up for spi recieverBinding and Setting Up the FlySky i6 Transmitter for a quadcopter/droneFLYSKY FS-A8S - Bind & Betaflight SetupHow to Bind Flysky Receiver FS A8S To The Turnigy Evolution RadioFLYSKY emax tinyhawk 6 DOLLAR mod - how toFirst Look - FlySky A8S Mini Receiver with PPM/iBus Support (Courtesy of Banggood)Como enlazar la emisora FlySky con IBus Flysky FS-A8S y Flysky FS-iA6BWhy Your Transmitter Won't Show in Betaflight - Most Common FixesBinding FS-A8S To Turnigy EvolutionRacerstar BR0703 10000kv thrust testRadiomaster TX16S - Binding Flysky - FS GR3E, IA6, IA6B and IA10B.Eachine X220S unboxing analysis binding fixing configuration and demo flight (Courtesy Banggood)Mix Flysky fs-i6 for robot tank steeringFlySky FS-i6X How to Setup TOP 5 FUNCTIONS for BEGINNER PILOTSFlysky FS-A8S Micro Receiver Review 👍👍👍How to wire and setup flysky Ibus in betaflight // Under 5 MinutesFLYSKY mini 4channel receiver(FS2A) Review & How to bind _ 제품리뷰 & 바인딩 방법