Sculpting a human figure with a 3d pen
Dan Tirels sculpture of the human figure using a 3d pen.
This is the follow up film from my previous demo that goes through the whole process of creating a sculpture with a 3d pen. Not sure if this is a conventional way of using the pen, but it works for me, I show the method starting with a few simple sketches.
It is important to have good reference material for this, a good way is to judge your own proportions, check you have the correct distance between shoulders, length of arms etc. It helps to start with a few simple stick drawings. Choose a simple standing pose.
Working with these 3d pens can be tricky and this is still very new to me, this is only the second time I have experimented with the technique.
Filmed in 2 parts over several days.
Part 1 : Making the base model to use as a template. Materials used : Newspaper, cardboard, parcel tape, bamboo skewers (to add some support to the legs and arms)
Part 2 : The 3d pen. Using a black 1.76mm PLA filament. This is applied in 2 halves so the base model can be removed before joining the 2 halves back together. The pen I'm using is a very basic model, you can only work with it for an hour at a time or it can get overheated and the motor will burn out.
Website : https://www.dantirels.co.uk/
Music : https://www.bensound.com-
Instagram http://instagram.com/dan_tirels
Facebook https://www.facebook.com/dan.tirels
Twitter https://www.twitter.com/@dantirels
Pinterest http://pinterest.com/dantirels
Видео Sculpting a human figure with a 3d pen канала Dan Tirels
This is the follow up film from my previous demo that goes through the whole process of creating a sculpture with a 3d pen. Not sure if this is a conventional way of using the pen, but it works for me, I show the method starting with a few simple sketches.
It is important to have good reference material for this, a good way is to judge your own proportions, check you have the correct distance between shoulders, length of arms etc. It helps to start with a few simple stick drawings. Choose a simple standing pose.
Working with these 3d pens can be tricky and this is still very new to me, this is only the second time I have experimented with the technique.
Filmed in 2 parts over several days.
Part 1 : Making the base model to use as a template. Materials used : Newspaper, cardboard, parcel tape, bamboo skewers (to add some support to the legs and arms)
Part 2 : The 3d pen. Using a black 1.76mm PLA filament. This is applied in 2 halves so the base model can be removed before joining the 2 halves back together. The pen I'm using is a very basic model, you can only work with it for an hour at a time or it can get overheated and the motor will burn out.
Website : https://www.dantirels.co.uk/
Music : https://www.bensound.com-
Instagram http://instagram.com/dan_tirels
Facebook https://www.facebook.com/dan.tirels
Twitter https://www.twitter.com/@dantirels
Pinterest http://pinterest.com/dantirels
Видео Sculpting a human figure with a 3d pen канала Dan Tirels
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
I spent 51 hours learning to use a 3D pen. Progress from beginner to 3D pen robot![3D pen] 배트맨 만들기. Making Joker-smiling batman with 3D penMaking DEADPOOL with 3D PEN | MARVEL X FORTNITE Fan Art SculptureHOW TO draw action figure in 3D | Overwatch Reaper 3D Hand DrawingMaking Captain America Eagle Sculpture I 3D pen & Polymer Clay장인의 디아블로 만들기Squidward - 3D pen - Spongebob[3D pen] 여자 만들기. Making a woman in white dress.3D pen works | Joker | Batman | 3D SIMO MultiProMaking a doctor with 3D Priting pen (3D Pen)Monoprinting : making marks소닉 만드는 장인3d pen | Making Mr. Krabs from SpongeBob square pants[3D pen] 호랑이 만들기. Making a tiger.3D pen | How to make T-Rex head with 3d penDan Tirels Moonoprinting demo, Monoprint oil paint7 things you want from your 3d pen work surfaceSimple low cost monoprinting demo using oil paint[3D펜] 하늘을 날으는 토토로 피규어 만들기 / [3D pen] Making TotoroMaking a UFO // Mynt3D Professional 3D Pen + DJI Mavic Pro